Standards Catalogue

​Virtual platform edges

This technical note aims to clarify the attributes used for calculating clearances and stepping distances with respect to real and virtual platform…

Application of Probabilistic Gauging Methods

This document sets out requirements for the application of probabilistic gauging based on Monte Carlo methods to calculate clearances between rolling…

Operation of Urban Rail Vehicles on or adjacent to GB Mainline Infrastructure

This document gives guidance for the introduction and operation of urban rail vehicles on or adjacent to the GB mainline railway. This guidance is…

Interface between Station Platforms, Track, Trains and Buffer Stops​

This document sets out requirements for the design and maintenance of station platforms for their safe interface with trains, track and buffer stops.

​Application of the Accessibility NTSN​

This document contains guidance on the application of the Accessibility (ACC) NTSN, particularly when undertaking work that would not necessarily…

Functionality and Management of Track Circuit Assisters (TCAs) on Rail Vehicles

This document sets out requirements for the functionality, testing and management of failures of TCAs on rail vehicles.

Use of Portable Ramps for Boarding and Alighting at Station Platforms

This TN provides guidance on the use of portable ramps and background information on the relevant requirements in the Accessibility National Technical…

Operation of Heritage Trains​

This document sets out requirements for managing the planning and operation of heritage train services on the GB mainline railway.

Reporting of Safety Related Information

The document sets out requirements for entering information into the Safety Management Intelligence System (SMIS). SMIS has been replaced by the Safe…

Guidance on the Infrastructure National Technical Specification Notice (INF NTSN)​

This document gives guidance on interpreting the requirements of the Infrastructure National Technical Specification Notice (INF NTSN) for application…

Guidance on the Energy National Technical Specification Notice

This document gives guidance on interpreting the requirements of the Energy National Technical Specification Notice (ENE NTSN) for application to the…

Route level assessment of technical compatibility between vehicles with traction batteries and infrastructure

The technical note aims to inform stakeholders on specific areas to carry out technical compatibility between battery-powered vehicles and…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document sets out requirements for the design, function and control of power operated exterior door systems on passenger vehicles traversing the…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements as National Technical Rules (NTRs) for rolling stock that traverses the Great Britain (GB) mainline 750 V direct…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements and guidance for all rolling stock operating over the Great Britain (GB) mainline 750 V dc conductor rail energy…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN)

This document provides guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN), including the application…

General Guidance for National Technical Specification Notices

This Guidance Note is intended for transport operators, project entities, assessment bodies and other organisations with responsibilities related to…

Guidance on the Application of the Control Command and Signalling NTSN

This document gives guidance on interpreting the requirements of the Control, Command and Signalling National Technical Specification Notice (CCS…

Section F(ii) - Your duties if you are acting as a handsignaller

Section R - Loading or unloading rail vehicles during engineering work

Section T(iii) - Protection of engineering work when the engineer takes possession of the line

Section V - Broken rails and bridge strikes

Temporary Block Working Ticket

Signalman's Point Setting Form (Rule Book Section F (part i)

Points Setting Agent's Form (Rule Book Section B Part 4)

End of Degraded Working

This document provides design details for sign AK215 - End of degraded working.

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Power changeover not applicable

This document provides design details for sign AJ16 – Power changeover not applicable.

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Raise pantograph (temporary power changeover)

This document provides design details for sign AJ14 - Raise pantograph (temporary power changeover).

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

OTP Mechanical Movement Limiting Device

This poster is provided by the M&EE Networking Group to remind the industry about the use of mechanical movement limiting devices and the restrictions…

Consequences of Lifting Whilst in "Dig Mode" or RCI Inactive / Overridden

This poster is provided by the M&EE Networking Group to remind industry about the serious consequences of lifting whilst in “Dig Mode” or if the RCI…

Rail Handling – Rail Turner Awareness

This poster is provided by the M&EE Networking Group to remind industry about the competence requirements necessary for the Crane Controller and…

Using Outriggers / Stabilisers on Plant

This poster is provided by the M&EE Networking Group to reminder planners and users of plant with outriggers that stability can be seriously affected…

Lifting Accessories Misuse

This poster is provided by the M&EE Networking Group to remind planners and users of plant about the dangers associated with the misuse of lifting…

Rated Capacity Indicator (RCI) Status Indicator Lights

This poster is provided by the M&EE Networking Group to remind industry about coloured indicator lights fitted to RRV excavator cranes and the…

OTP Tandem Lifting and Indication

This poster is provided by the M&EE Networking Group to remind planners to use the latest planning information/tools provided by the RCI suppliers for…

RCI Motion Cut

This poster is provided by the M&EE Networking Group to remind the industry that the RCI function automatically stops further movement of the machine…

Lift and Carry Using OTP in Road Mode

This poster is provided by the M&EE Networking Group to remind the operator of road-rail excavator cranes of the need for caution because lift and…

Twin Jib Crane Competence

This poster is provided by the M&EE Networking Group to remind industry that when using a twin jib crane under the control of one operator then there…