Standards Catalogue

ATC (AWS) Bell Plug & Socket

ATC (AWS) Receiver Plugs & Sockets, Receiver Twin Plug Assembly

Type of Colour Light Lignal

Specification for vulcanised rubber compound for automatic warning system

ATC & (AWS) Receiver Junction Box

Specification for Civil Engineering Standard Design Spring Steel Clips for Flat Bottom Track

Time and Date in Railway Systems

This document sets out requirements and guidance for the use, interpretation and formatting of time and date information in railway systems.

Identification of roller bearing defects

This document sets out requirements and guidance for the identification and recording of roller bearing defects at overhaul, for taper, cylindrical…

Psychometric Assessment in Train Driver Selection

This document sets out requirements and guidance on the psychometric assessment used during the selection process for train driver candidates who will…

Guidance on the Common Safety Method for Risk Evaluation and Assessment

This document gives guidance on application of the principles in the Common Safety Method for Risk Assessment and Evaluation.

Lineside Operational Signs

Guidance on wagon maintenance related to recommendations from RAIB reports

This technical note documents findings from all reports, bulletins, and safety digests, published by RAIB, where maintenance of rail wagons has been…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Signing of Temporary and Emergency Speed Restrictions

This document sets out requirements, rationale and guidance for signing of Temporary Speed Restrictions (TSRs) and Emergency Speed Restrictions (ESRs)…

Vehicle Registration, Marking and Numbering

This document sets out requirements for the registration, marking and numbering of rail vehicles operating on the Great Britain (GB) mainline network.

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Dealing with a train accident or train evacuation

You will need this module if you carry out the duties of a driver, guard or signaller.

Changes to National Operations Publications for March 2026

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train stopped by train failure

You will need this module if you carry out the duties of a driver or signaller.

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

AC Electrified Lines

This module is required if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

AC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an AC electrified area to carry out their duties, with the exception…

End of Degraded Working

This document provides design details for sign AK215 - End of degraded working.

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Power changeover not applicable

This document provides design details for sign AJ16 – Power changeover not applicable.

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Raise pantograph (temporary power changeover)

This document provides design details for sign AJ14 - Raise pantograph (temporary power changeover).

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Misuse of MEWPs

OTP Professional Driving Guidance

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager. 

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…