Standards Catalogue

GB Requirements for Platform Height, Platform Offset and Platform Width

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for platform height, platform offset and platform width. 

​Changes to National Operations Publications for December 2025

Code of Practice for Management of Points within Engineering Work Sites

This Code of Practice provides guidance on the arrangements for the Management of Points within Engineering Worksites. It applies to all railborne…

Traction capacitor safety awareness

This technical note aims to provide an understanding of good design and maintenance practices for capacitors, to reduce the risks of explosions caused…

Failure of, or work on, signalling equipment - signallers' regulations

You will need this module if you carry out the duties of a signaller.

Extended Block Working

This technical note will assist industry with the introduction of extended block working.

Signaller's Single Line Working Form

This form is used by the signaller to record the arrangements for implementing single line working.

GSM-R Handbook

This handbook is intended as guidance to users of the GSM-R system used on the GB mainline railway.

Hauling Unbraked Fixed Formations in Freight Trains

This document gives guidance on the braking requirements for hauling unbraked multiple units and other fixed formations in a freight train. This…

Passenger Train Dispatch and Platform Safety Measures

This document sets out requirements and guidance for the development, review and implementation of passenger train dispatch processes and measures to…

Guidance on the Energy National Technical Specification Notice

This document gives guidance on interpreting the requirements of the Energy National Technical Specification Notice (ENE NTSN) for application to the…

Route level assessment of technical compatibility between vehicles with traction batteries and infrastructure

The technical note aims to inform stakeholders on specific areas to carry out technical compatibility between battery-powered vehicles and…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document sets out requirements for the design, function and control of power operated exterior door systems on passenger vehicles traversing the…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements as National Technical Rules (NTRs) for rolling stock that traverses the Great Britain (GB) mainline 750 V direct…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements and guidance for all rolling stock operating over the Great Britain (GB) mainline 750 V dc conductor rail energy…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN)

This document provides guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN), including the application…

General Guidance for National Technical Specification Notices

This Guidance Note is intended for transport operators, project entities, assessment bodies and other organisations with responsibilities related to…

Guidance on the Application of the Control Command and Signalling NTSN

This document gives guidance on interpreting the requirements of the Control, Command and Signalling National Technical Specification Notice (CCS…

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Dealing with a train accident or train evacuation

You will need this module if you carry out the duties of a driver, guard or signaller.

Changes to National Operations Publications for March 2026

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train stopped by train failure

You will need this module if you carry out the duties of a driver or signaller.

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

AC Electrified Lines

This module is required if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

AC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an AC electrified area to carry out their duties, with the exception…

End of Degraded Working

This document provides design details for sign AK215 - End of degraded working.

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Power changeover not applicable

This document provides design details for sign AJ16 – Power changeover not applicable.

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Raise pantograph (temporary power changeover)

This document provides design details for sign AJ14 - Raise pantograph (temporary power changeover).

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

OTP Mechanical Movement Limiting Device

This poster is provided by the M&EE Networking Group to remind the industry about the use of mechanical movement limiting devices and the restrictions…

Consequences of Lifting Whilst in "Dig Mode" or RCI Inactive / Overridden

This poster is provided by the M&EE Networking Group to remind industry about the serious consequences of lifting whilst in “Dig Mode” or if the RCI…

Rail Handling – Rail Turner Awareness

This poster is provided by the M&EE Networking Group to remind industry about the competence requirements necessary for the Crane Controller and…

Using Outriggers / Stabilisers on Plant

This poster is provided by the M&EE Networking Group to reminder planners and users of plant with outriggers that stability can be seriously affected…

Lifting Accessories Misuse

This poster is provided by the M&EE Networking Group to remind planners and users of plant about the dangers associated with the misuse of lifting…

Rated Capacity Indicator (RCI) Status Indicator Lights

This poster is provided by the M&EE Networking Group to remind industry about coloured indicator lights fitted to RRV excavator cranes and the…

OTP Tandem Lifting and Indication

This poster is provided by the M&EE Networking Group to remind planners to use the latest planning information/tools provided by the RCI suppliers for…

RCI Motion Cut

This poster is provided by the M&EE Networking Group to remind the industry that the RCI function automatically stops further movement of the machine…

Lift and Carry Using OTP in Road Mode

This poster is provided by the M&EE Networking Group to remind the operator of road-rail excavator cranes of the need for caution because lift and…

Twin Jib Crane Competence

This poster is provided by the M&EE Networking Group to remind industry that when using a twin jib crane under the control of one operator then there…