Standards Catalogue

Guidance on the Energy National Technical Specification Notice

This document gives guidance on interpreting the requirements of the Energy National Technical Specification Notice (ENE NTSN) for application to the…

Route level assessment of technical compatibility between vehicles with traction batteries and infrastructure

The technical note aims to inform stakeholders on specific areas to carry out technical compatibility between battery-powered vehicles and…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document sets out requirements for the design, function and control of power operated exterior door systems on passenger vehicles traversing the…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements as National Technical Rules (NTRs) for rolling stock that traverses the Great Britain (GB) mainline 750 V direct…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements and guidance for all rolling stock operating over the Great Britain (GB) mainline 750 V dc conductor rail energy…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN)

This document provides guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN), including the application…

General Guidance for National Technical Specification Notices

This Guidance Note is intended for transport operators, project entities, assessment bodies and other organisations with responsibilities related to…

Guidance on the Application of the Control Command and Signalling NTSN

This document gives guidance on interpreting the requirements of the Control, Command and Signalling National Technical Specification Notice (CCS…

Requirements for the operation of freight trains and the conveyance of dangerous goods by any train

This document sets out requirements and guidance relating to the safe operation of freight trains and the safe movement of dangerous goods.

Provision of Signage at Power Changeover Locations

This document sets out requirements and guidance for provision of signage at power changeover locations for multi-mode rolling stock.

Medical Fitness Assessment

This document sets out requirements and guidance for the management of medical fitness assessment for safety critical workers on the GB mainline…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Lineside Operational Signs

Junction signal sighting

This technical note has been issued to help the industry manage the sighting of colour light junction signals. This document is responding to the RAIB…

TPWS receiver aerial location

This technical note will help industry identify the risks associated with mounting the Train Protection and Warning System (TPWS) receiver aerial…

Wheelsets handling and storage

This document sets out requirements and guidance for the handling and storage of wheelsets and their components.

Level Crossing Systems

This document sets out requirements for level crossing systems and guidance on the application of controls to mitigate the risk of collision of a…

Section F(ii) - Your duties if you are acting as a handsignaller

Section R - Loading or unloading rail vehicles during engineering work

Section T(iii) - Protection of engineering work when the engineer takes possession of the line

Section V - Broken rails and bridge strikes

Temporary Block Working Ticket

Signalman's Point Setting Form (Rule Book Section F (part i)

Points Setting Agent's Form (Rule Book Section B Part 4)

End of Degraded Working

This document provides design details for sign AK215 - End of degraded working.

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Power changeover not applicable

This document provides design details for sign AJ16 – Power changeover not applicable.

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Raise pantograph (temporary power changeover)

This document provides design details for sign AJ14 - Raise pantograph (temporary power changeover).

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Misuse of MEWPs

OTP Professional Driving Guidance

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager. 

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…