Standards Catalogue

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Identification of Signalling and Related Equipment

This document sets out the principles for ensuring that signalling and related assets are uniquely identified.

Passenger Train Dispatch and Platform Safety Measures

Low Voltage Power Supplies in Electrified Areas

This document includes requirements for earthing, bonding and the control of traction currents in low voltage power supplies in areas of the GB…

ERTMS Key Management

This document contains requirements for the management of cryptographic keys on the mainline railway to facilitate secure European Rail Traffic…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document provides GB requirements for exterior doors and Selective Door Operation (SDO) systems.

GSM-R Train Voice Radio Systems

This document sets out the requirements for the application of GSM-R train voice radio systems, specifically interface requirements for the…

Guidance on the Energy TSI

This document gives guidance on interpreting the requirements of the Energy Technical Specification for Interoperability 2014 (ENE TSI) Commission…

The Management of Packet 44 Applications

In-Service Examination and Reference Limits for Freight Wagons

Guidance on High-Integrity Software-Based Systems for Railway Applications

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Duties of the machine controller (MC) and on-track plant operator

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator.

General duties of an individual working alone (IWA)

This handbook is for those personnel with general duties of an individual working alone (IWA).

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller, train preparer or competent person.

General duties and track safety for track workers

This handbook is for those personnel who need to go on the operational railway to carry out their duties, with the exception of a train driver, guard,…

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Use of warning horn

This poster is provided by the M&EE Networking Group to remind the industry about the use of the warning horn.

Code of Practice for Plant Any Line Open (ALO) Working

Code of Practice Protection of Non PTS Holders at OTM Stabling Points

This Code of Practice concerns all OTM stabling points and can be used when non PTS holders need to visit site. The document has been written to…

Code of Practice for Use and Loading of MEWPs

This Code of Practice details the use of MEWPs, particularly with processes for loads that should safely be permitted in the work platform of a MEWP.…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Points run throughs

Code of Practice Planning for the Use of Mobile Operated Plant

Code of Practice for Action to be Taken in the Event of an Accident or Incident Involving OTP

This Code of Practice details the actions to be taken, and by whom, following an accident or incident involving OTP.  It deals with the engineering…

Code of Practice for Management of Points within Engineering Work Sites

This Code of Practice is to provide guidance on the arrangements for the Management of Points within Engineering Worksites for all rail borne vehicles…

Pulling Rail with Road-Rail Excavator Cranes

This Code of Practice provides good practice in the safe pulling of continuous welded rail (CWR) and to minimise the risk of damage to the CWR or…