Standards Catalogue

Guidance on the Energy National Technical Specification Notice

This document gives guidance on interpreting the requirements of the Energy National Technical Specification Notice (ENE NTSN) for application to the…

Route level assessment of technical compatibility between vehicles with traction batteries and infrastructure

The technical note aims to inform stakeholders on specific areas to carry out technical compatibility between battery-powered vehicles and…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document sets out requirements for the design, function and control of power operated exterior door systems on passenger vehicles traversing the…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements as National Technical Rules (NTRs) for rolling stock that traverses the Great Britain (GB) mainline 750 V direct…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements and guidance for all rolling stock operating over the Great Britain (GB) mainline 750 V dc conductor rail energy…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN)

This document provides guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN), including the application…

General Guidance for National Technical Specification Notices

This Guidance Note is intended for transport operators, project entities, assessment bodies and other organisations with responsibilities related to…

Guidance on the Application of the Control Command and Signalling NTSN

This document gives guidance on interpreting the requirements of the Control, Command and Signalling National Technical Specification Notice (CCS…

Guidance on the Energy National Technical Specification Notice

This document gives guidance on interpreting the requirements of the Energy National Technical Specification Notice (ENE NTSN) for application to the…

Route level assessment of technical compatibility between vehicles with traction batteries and infrastructure

The technical note aims to inform stakeholders on specific areas to carry out technical compatibility between battery-powered vehicles and…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document sets out requirements for the design, function and control of power operated exterior door systems on passenger vehicles traversing the…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements as National Technical Rules (NTRs) for rolling stock that traverses the Great Britain (GB) mainline 750 V direct…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document sets out requirements and guidance for all rolling stock operating over the Great Britain (GB) mainline 750 V dc conductor rail energy…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the 750 V direct current (dc) conductor rail energy subsystem and the interfaces to rolling stock operating…

Guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN)

This document provides guidance on the Operation and Traffic Management National Technical Specification Notice (OPE NTSN), including the application…

General Guidance for National Technical Specification Notices

This Guidance Note is intended for transport operators, project entities, assessment bodies and other organisations with responsibilities related to…

Guidance on the Application of the Control Command and Signalling NTSN

This document gives guidance on interpreting the requirements of the Control, Command and Signalling National Technical Specification Notice (CCS…

Absolute block regulations

You will need this module if you carry out the duties of a signaller in an absolute block area.

Preparation and movement of trains: Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

General safety responsibilities and personal track safety for non-track workers

You will need this module if you carry out the duties of: • a train driver • a guard • a shunter • a designated person (DP) • a signaller • a crossing…

Managing incidents, floods and snow

You will need this module if you carry out the duties of: • driver • signaller. You will also need this module if you are likely to be involved in, or…

Personnel asking for trains to be stopped form

This form is used by signallers to record the details when personnel ask for a line to be blocked for their own protection when going on or near the…

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

IWA or COSS setting up safe systems of work within possessions on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of an IWA or COSS setting up safe systems of work within ERTMS possessions.

IWA or COSS setting up safe systems of work within possessions

You will need this handbook if you carry out the duties of an IWA or COSS setting up safe systems of work within possessions.

DC electrified lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

SPAD indicator sign and identification plate

This document provides design details for AC07 sign - SPAD indicator sign and identification plate.

Radio electronic token block: loop clear marker

This document provides design details for AB06 sign - Radio electronic token block: loop clear marker.

Private level crossings: operating instructions for barrier (PCR diagram 104)

Supplementary sign at crossings where trains pass in excess of 100 mph

Signs for use with miniature red / green lights with and without a telephone (PCR diagrams 107 and 108)

Platform Stop Markers

Reminder at a crossing with user-operated barriers (PCR diagram 112)

Instructions to non-vehicular traffic at a crossing with miniature stop lights (PCR diagram 114)

Warning of traction system changeover

Warning sign for a non-vehicular crossing (PCR diagram 101)

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This covers the use of plant…

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for Piling using OTP

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.