Standards Catalogue

Possession of a running line for engineering work

You will need this module if you carry out the duties of a driver or signaller.

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Code of Practice for Management of Siding Safety Surveys

This Code of Practiceprovides guidance to enable the effective setting up of a safe system of work within all sidings allocated for stabling and…

Code of Practice for Route Knowledge within Possessions

This Code of Practice contains guidance and generic good practice for the management of route knowledge for train drivers within a possession. It sets…

OTP Mechanical Movement Limiting Device

This poster is provided by the M&EE Networking Group to remind the industry about the use of mechanical movement limiting device and the restrictions…

Seasonal Operating of OTP

This poster is provided by the M&EE Networking Group to remind operators when adhesion is low, keep it slow.

Rail Handling – Rail Turner Awareness

This poster is provided by the M&EE Networking Group to remind industry about the competence requirements necessary for the Crane Controller and…

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

On-Track Plant, Trolleys and Associated Equipment

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Failure of, or work on, signalling equipment - signallers' regulations

You will need this module if you carry out the duties of a signaller.

Station duties and train dispatch

You will need this module if you carry out the duties of a driver, a guard, a person in charge (PIC) of dispatch or staff responsible for train…

General signalling regulations

You will need this module if you carry out the duties of a signaller.

Preparation and working of freight trains

You will need this module if you carry out the duties of the following in relation to freight trains: train driver, guard, shunter, train preparer.

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Observing and obeying signalling indications. Train warning systems. Reporting signalling failures and irregularities

You will need this module if you carry out the duties of a driver, person controlling train movements, shunter or signaller.

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book Handbook issues (GERT8000).

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Duties of the COSS and person in charge when using a hand trolley

You will need this handbook if you are the COSS or SWL and person in charge when using a hand trolley.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

This document provides design details for CC16 sign - Supplementary sign where crossing is used for animal traffic (PCR diagram 118).

Car Stop Markers on Station Platforms

Car Stop Markers on Station Platforms

FTAP Flexible Train Arrival Point

A set of four signs to direct engineering trains or on-track machine to locate the required stopping point within a possession or protection zone when…

Car Stop Markers on Station Platforms

No refuges sign

This document provides design details for BA05 sign - No refuges sign.

End of Emergency special Working

This document provides design details for sign AK215 - End of Emergency Special Working

Temporary Speed Restriction Repeater Warning Board

This document provides design details for AF03 sign - Temporary speed restriction repeater warning board.

Horse riders to dismount at crossings where there are overhead electric lines

This document provides design details for CC17 sign - Horse riders to dismount at crossings where there are overhead electric lines.

Lineside telephone

This document provides design details for DB03 sign - Lineside telephone.

Telephone number

This document provides design details for DA01 sign - Telephone number

Reporting track defects

This poster is provided by the M&EE Networking Group to remind industry that any track defects which could affect plant and equipment safely…

Code of Practice for Rail Mounted Manually Propelled Equipment

This Code of Practice details the use and some aspects of the design and maintenance of rail mounted manually propelled equipment (trolleys and…

Code of Practice Planning for the Use of Mobile Operated Plant

This Code of Practice details minimum requirements for planning for the use of mobile operated plant excluding lifting operations. It applies to…

Code of Practice for Loading of OTP

This Code of Practice gives guidance on the arrangements for loading and securing of typical loads associated with all on-track plant (OTP) whilst on…

Code of Practice for Defective OTP Safety Critical Equipment

This Code of Practice details what actions should be undertake when On-Track Plant (OTP) is discovered to have defective safety critical equipment…

Use of Mobile Devices

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by using a mobile phone whilst driving a train. Further…

Code of Practice for Control of Mobile Communication Equipment use in Driving Cabs

This Code of Practice contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains. It sets…

Code of Practice for OTM Route Conducting Policy

This Code of Practice contains requirements and guidance for OTM driver’s route conducting or being conducted. Also to assist in the improvement of…

Inspection of Demountable MEWP and Lifting Equipment

This Code of Practice details the arrangements for inspecting MEWPs and lifting equipment in accordance with legislation when attaching to the base…

MEWP Planning

This poster is provided by the M&EE Networking Group to remind industry that all MEWP activities must be properly planned and site specific - even if…