Standards Catalogue

Procedure for Dealing with Notices from Outside Authorities on their Proposals to Install Cathodic Protection to Their Own Buried Structures Crossing or Adjacent to Electrified Lines

Specification for Transformer-Rectifier Units for General Railway Signalling Purposes

Level Crossing Circuits: Capacitor/Resistor Slugging Networks

Axle Counters: Electro Magnetic Interference

Instructions for the Installation and Removal of Traction Bonding on All Electrified Lines

Procedure for the Disconnection of Yellow" Bonds or Action when Reported Broken or Disconnected on A.C Electrified Lines"

Automatic Level Crossings Fitted with BR843 MK2 Barrier Machines - Made by Smiths Industries LTD

Instructions to Staff Seeking Evidence of cause of Serious Railway Accident

Instructions for Isolation and Earthing for Feeder Switch Maintenance for A.C Electrified Lines

Conditions Governing Construction Work by Outside Partied on Operational Land or on Non-Operational Land Affecting Operational Land

Location of Catch Points in MAS Territory

Painting Schedule: Signal Boxes and Signal Department Equipment

Control of Colour Light Signals in Relation to Possible 'Reading Through'

Emergency Detonator Placers in Colour Light Signalling Areas

Control of AWS Indicators for Permissive Working

Braking Distances

Braking Distances

Specification for Miniature Tractive Armature AC Lamp Proving Relay Plug-in Type for Railway Signalling Purposes

Specification for Miniature D.C. Non-Safety Time Delay Relay Unit; Plug-in Type, for use in Point Control Circuits

Specification for Miniature Tractive Armature DC Single Wound Lamp Proving Relay, Plug-in Type for Railway Signalling Purposes

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Track circuit block regulations

You will need this module if you carry out the duties of a signaller in a track circuit block area.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Deviation for countdown markers

This document provides design details for DEV-AK102-01 sign - Deviation for station approach countdown markers Applicable to the South West Trains…

Termination of special AWS working

This document provides design details for AA04 sign - Termination of special AWS working.

Permanently installed AWS cancelling indicator

This document provides design details for AA05 sign - Permanently installed AWS cancelling indicator

Warning of the start of cab-signalling

This document provides design details for AB01 sign - Warning of the start of cab-signalling.

Indication of start of cab-signalling

This document provides design details for AB02 sign - Indication of start of cab-signalling.

Indication of end of cab-signalling

This document provides design details for AB03 sign - Indication of end of cab-signalling.

TVM block marker

This document provides design details for AB04 sign - TVM block marker.

Cab signalling shunt entry board

This document provides design details for AB05 sign - Cab signalling shunt entry board.

Emergency telephone

This document provides design details for DB04 sign - Emergency telephone.

Radio electronic token block: loop clear marker

This document provides design details for AB06 sign - Radio electronic token block: loop clear marker.

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…