Standards Catalogue

Policy and Instruction for the Design of Signalling Works

Special Inspection Notice (SIN) Monitoring

Use of Telephone Marking Tape

Procedure for the Inspection of Bonds Attached to Scaffolding on A.C Electrified Lines

Requirements for Lockout Device to Protect Staff Working on Trains

Specification for Radio Frequency Coaxial Feeder Cable with Zero-Halogen Low-Smoke Sheath for Railway Telecommunications

Train to Signalbox Radio System (Train Radio)

Specification for Track Datum Markers on all Overhead Electrified Lines

Standards for the Maintenance of Mark IIIB Overhead Line Equipment

Examination of Rails at Locations Outside the Scope of Procedures U1 and U3

Management of Safety-Related Rail Vehicle Defects

This document defines requirements for recording, analysing and reporting safety-related defects, faults and failures on rail vehicles, plant and…

Communication of urgent operating advice

This standard sets out requirements, rationale and guidance for reporting and communicating urgent operating safety information.

Requirements for the Position of Infrastructure and for Defining and Maintaining Clearances

This document sets out requirements for positioning infrastructure and maintaining the position of track relative to infrastructure to achieve gauge…

Managing Train Accident Risk Arising from Train Operations

This document sets out requirements and guidance for the management of train accident risk arising from train operations as part of the GB rail…

Rail Industry Standard for Wheelsets

This document supports GMRT2466 and sets out requirements for the design, manufacture and maintenance of wheelsets and their components.

Railway Wheelsets

This document sets out requirements for the design, manufacture and maintenance of wheelsets and their components. Access the tread profile…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the alternating current (ac) energy subsystem and the interfaces to rolling stock operating over the ac…

Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

This document sets out interface requirements to the alternating current (ac) energy subsystem for all rolling stock operating over the Great Britain…

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements and guidance for new, renewed and upgraded ac energy subsystem, and the interfaces to rolling stock and operation…

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Track circuit block regulations

You will need this module if you carry out the duties of a signaller in a track circuit block area.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

This document provides design details for CC16 sign - Supplementary sign where crossing is used for animal traffic (PCR diagram 118).

Car Stop Markers on Station Platforms

Car Stop Markers on Station Platforms

FTAP Flexible Train Arrival Point

A set of four signs to direct engineering trains or on-track machine to locate the required stopping point within a possession or protection zone when…

Car Stop Markers on Station Platforms

No refuges sign

This document provides design details for BA05 sign - No refuges sign.

End of Emergency special Working

This document provides design details for sign AK215 - End of Emergency Special Working

Temporary Speed Restriction Repeater Warning Board

This document provides design details for AF03 sign - Temporary speed restriction repeater warning board.

Horse riders to dismount at crossings where there are overhead electric lines

This document provides design details for CC17 sign - Horse riders to dismount at crossings where there are overhead electric lines.

Lineside telephone

This document provides design details for DB03 sign - Lineside telephone.

Telephone number

This document provides design details for DA01 sign - Telephone number

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…