Standards Catalogue

Escalators - Registration and Periodic Examination Records

Despatch of Equipment to Store, Service Centre & Technical Investigation Centre

S&T Departmental Handbooks: Introduction

Engineers Handbook: Technical Investigation Centre (TIC)

Management of Wrong Side Failures

Lifting Barrier Machines: BR Spec 843 Mk1 & Mk2

Control of Trailing Connection Worked by Intermediate Ground Frame: Released from the Signal Box in Rear: Absolute Block Line

Correlation of Circuit Records & Actual Wiring Prior to Undertaking Signalling Work

Inspection of S&T Sites and Systems (What to Look For)

Engineers Handbook: Training - Organisation Structure and Contacts

Specification for Miniature Tractive Armature AC Immune DC Slow Release Neutral Line Relay Plug-in Type for Railway Signalling Purposes

Specification for Miniature Tractive Armature AC Immune DC Neutral Track Relay, Plug-in Type for Railway Signalling Purposes

Specification for Miniature Tractive Armature AC Immune DC Slow Pick-up Neutral Line Relay Plug-In Type for Railway Signalling Purposes

Specification for Miniature Tractive Armature DC Neutral Track Relay, Plug-in Type for Railway Signalling Purposes

Specification for Miniature Tractive Armature AC Immune DC Neutral Line Relay, Plug-in Type for Railway Signalling

Identification of Colour Light Signals

Specification for Miniature Tractive Armature AC Immune DC Biased Contactor Relay, Plug-in Type for Railway Signalling Purposes

Specification for Electrical Requirements of High Voltage Electric Point Machines for Railway Signalling Purposes

Signalling into Terminal & Bay Platforms

Specification for Steel Screws for Chairs and Baseplates

Rule Book modules issue history

TS8 - One-train working regulations

Section F(ii) - Your duties if you are acting as a handsignaller

Section H(i) - Working of trains - Normal arrangements

Section M(i) - Train stopped by train accident, including fire or accidental division

Section N - Single line working

Section T(iii) - Protection of engineering work when the engineer takes possession of the line

Section U(iii) - Permissible speeds and enhanced permissible speeds

Section F(i) - Manual operation of power operated points

Section A - General responsibilities, safety and security

Deviation for countdown markers

This document provides design details for DEV-AK102-01 sign - Deviation for station approach countdown markers Applicable to the South West Trains…

Termination of special AWS working

This document provides design details for AA04 sign - Termination of special AWS working.

Permanently installed AWS cancelling indicator

This document provides design details for AA05 sign - Permanently installed AWS cancelling indicator

Warning of the start of cab-signalling

This document provides design details for AB01 sign - Warning of the start of cab-signalling.

Indication of start of cab-signalling

This document provides design details for AB02 sign - Indication of start of cab-signalling.

Indication of end of cab-signalling

This document provides design details for AB03 sign - Indication of end of cab-signalling.

TVM block marker

This document provides design details for AB04 sign - TVM block marker.

Cab signalling shunt entry board

This document provides design details for AB05 sign - Cab signalling shunt entry board.

Emergency telephone

This document provides design details for DB04 sign - Emergency telephone.

Radio electronic token block: loop clear marker

This document provides design details for AB06 sign - Radio electronic token block: loop clear marker.

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…