Standards Catalogue

Escalators - Registration and Periodic Examination Records

Despatch of Equipment to Store, Service Centre & Technical Investigation Centre

S&T Departmental Handbooks: Introduction

Engineers Handbook: Technical Investigation Centre (TIC)

Management of Wrong Side Failures

Control of Trailing Connection Worked by Intermediate Ground Frame: Released from the Signal Box in Rear: Absolute Block Line

Lifting Barrier Machines: BR Spec 843 Mk1 & Mk2

Correlation of Circuit Records & Actual Wiring Prior to Undertaking Signalling Work

Inspection of S&T Sites and Systems (What to Look For)

Engineers Handbook: Training - Organisation Structure and Contacts

Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

This document sets out interface requirements and guidance for the alternating current (ac) energy subsystem for all rolling stock operating over…

ERTMS National Identities Management

This document sets out the requirements for arrangements for the management of the ERTMS National Identities on the GB mainline railway.

Infrastructure Based Train Detection Interface Requirements

Defective On-Train Equipment

This document sets out requirements to be applied when on-train equipment becomes defective and provides guidance to assist the railway undertakings…

Trespass Risk Assessment

This document provides a common framework for trespass risk assessments, developed from the outputs of RSSB research project T1183 - Good practice…

Passenger Train Dispatch and Platform Safety Measures

This document sets out requirements and guidance for the development, review and implementation of passenger train dispatch processes and measures to…

Process for Adding, Removing or Modifying Lettered Differential Permissible Speeds

This document sets out requirements and guidance to support the process of adding, removing or modifying a Lettered Differential Permissible Speed…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

This document sets out requirements and responsibilities for the assessment of technical compatibility at route level for vehicles and infrastructure.

Client Safety Assurance of High Integrity Software-Based Systems for Railway Applications

This document sets out requirements for safety assurance of high integrity software-based systems for railway applications.

Interface between Station Platforms, Track, Trains and Buffer Stops

RIS-7016-INS brings together requirements to provide an integrated and consistent set covering station platforms, the interface between platforms,…

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Track circuit block regulations

You will need this module if you carry out the duties of a signaller in a track circuit block area.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Open level crossing combined speed restriction / whistleboard

This document provides design details for AH02m sign - Open level crossing combined speed restriction / whistleboard.

Automatic level crossing wrong direction speed restriction board

This document provides design details for AH04m sign - Automatic level crossing wrong direction speed restriction board.

Neutral section warning board

This document provides design details for AJ01 sign - Neutral section warning board.

Lower pantograph

This document provides design details for AJ03 sign - Lower pantograph.

Temporary speed restriction warning boards (km/h)

This document provides design details for AF02k sign - Temporary speed restriction warning boards (km/h).

Platform Stop Markers

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

Temporary speed restriction repeater warning board

No refuges sign

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…