Standards Catalogue

Changes to National Operations Publications for March 2024

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Driver’s Single Line Working Ticket

This form should be used by the driver when single line working applies.

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Guidance on the Application of the Control of Electromagnetic Fields at Work Regulations

This document gives guidance on the application of the Control of Electromagnetic Fields at Work Regulations in the railway environment, and…

On-Train Camera Monitoring Systems

This document sets out requirements for the installation and use of modern camera systems for the purposes of recording, storing, and accessing video…

Infrastructure Based Train Detection Interface Requirements

This standard specifies the infrastructure based train detection system parameters that are necessary to support technical compatibility with GB…

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

On-Track Plant, Trolleys and Associated Equipment

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Rule Book Section Z (Part i) - AC electrified lines

Section T(ii) - Protection of engineering work when the engineer takes possession of the line

Section J - Shunting

Working Manual for Rail Staff - Freight Train Operations - Table A - Conversion Chart SLU's - Feet - Metres

Working Manual for Rail Staff - Freight Train Operations - Table C1 - Route Availability (RA)

Working Manual for Rail Staff - Freight Train Operations - Table C2 - Route Availability Assessment

Working Manual for Rail Staff- Freight Train Operations - Marshalling and Composition of Freight Trains

Working Manual for Rail Staff - Freight Train Operations - Movement of Freight Trains

Working Manual for Rail Staff - Freight Train Operations - Special Freight Trains and Wagons

Working Manual for Rail Staff, Handling and Carriage of Dangerous Goods - Appendix 1 - List of Dangerous Goods with their United Nations number, Dangerous Goods Class and TOPS Commodity Code

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

This document provides design details for CC16 sign - Supplementary sign where crossing is used for animal traffic (PCR diagram 118).

Car Stop Markers on Station Platforms

Car Stop Markers on Station Platforms

FTAP Flexible Train Arrival Point

A set of four signs to direct engineering trains or on-track machine to locate the required stopping point within a possession or protection zone when…

Car Stop Markers on Station Platforms

No refuges sign

This document provides design details for BA05 sign - No refuges sign.

End of Emergency special Working

This document provides design details for sign AK215 - End of Emergency Special Working

Temporary Speed Restriction Repeater Warning Board

This document provides design details for AF03 sign - Temporary speed restriction repeater warning board.

Horse riders to dismount at crossings where there are overhead electric lines

This document provides design details for CC17 sign - Horse riders to dismount at crossings where there are overhead electric lines.

Lineside telephone

This document provides design details for DB03 sign - Lineside telephone.

Telephone number

This document provides design details for DA01 sign - Telephone number

Reporting track defects

This poster is provided by the M&EE Networking Group to remind industry that any track defects which could affect plant and equipment safely…

Code of Practice for Rail Mounted Manually Propelled Equipment

This Code of Practice details the use and some aspects of the design and maintenance of rail mounted manually propelled equipment (trolleys and…

Code of Practice Planning for the Use of Mobile Operated Plant

This Code of Practice details minimum requirements for planning for the use of mobile operated plant excluding lifting operations. It applies to…

Code of Practice for Loading of OTP

This Code of Practice gives guidance on the arrangements for loading and securing of typical loads associated with all on-track plant (OTP) whilst on…

Code of Practice for Defective OTP Safety Critical Equipment

This Code of Practice details what actions should be undertake when On-Track Plant (OTP) is discovered to have defective safety critical equipment…

Use of Mobile Devices

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by using a mobile phone whilst driving a train. Further…

Code of Practice for Control of Mobile Communication Equipment use in Driving Cabs

This Code of Practice contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains. It sets…

Code of Practice for OTM Route Conducting Policy

This Code of Practice contains requirements and guidance for OTM driver’s route conducting or being conducted. Also to assist in the improvement of…

Inspection of Demountable MEWP and Lifting Equipment

This Code of Practice details the arrangements for inspecting MEWPs and lifting equipment in accordance with legislation when attaching to the base…

MEWP Planning

This poster is provided by the M&EE Networking Group to remind industry that all MEWP activities must be properly planned and site specific - even if…