Standards Catalogue

Absolute Block Regulations

Tokenless Block Regulations Amendment Issue No.1 (BR30062/23): Oct 1993

Safety of Contractors Staff Working On or Near the Line (Where the Contractor Provides the Person In Charge of Work)

Joint Interim Standard Incident Management Document

Track Circuits - Residual Voltage

Contractors Safety On or Near The Running Lines

Periodical Reviewing of Rules

Asbestos

DC Electrified Track: Electrical Protection Arrangements for Work On or Near Conductor Rails

Cleaning of Glazing

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

On-Track Plant, Trolleys and Associated Equipment

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Track circuit block regulations

You will need this module if you carry out the duties of a signaller in a track circuit block area.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

750 V DC electrification boundary - entering

This document provides design details for AJ06 sign - 750 V DC electrification boundary - entering.

Entering and leaving an IVRS zone marker

This document provides design details for DC06 sign - Entering and leaving an IVRS zone marker.

Termination of AWS gap

This document provides design details for AA02 sign - Termination of AWS gap.

GSM-R signal box phone number sign

This document provides design details for DD02 sign - GSM-R signal box phone number.

Commencement of special AWS working

This document provides design details for AA03 sign - Commencement of special AWS.

Deviation for countdown markers

This document provides design details for DEV-AK102-01 sign - Deviation for station approach countdown markers Applicable to the South West Trains…

Termination of special AWS working

This document provides design details for AA04 sign - Termination of special AWS working.

Permanently installed AWS cancelling indicator

This document provides design details for AA05 sign - Permanently installed AWS cancelling indicator

Warning of the start of cab-signalling

This document provides design details for AB01 sign - Warning of the start of cab-signalling.

Indication of start of cab-signalling

This document provides design details for AB02 sign - Indication of start of cab-signalling.

Code of Practice for Handling Serviceable Rail with RRV Excavator Cranes including Thimbling

Code of Practice for Safety Related Defect Reporting for OTP and Plant & Equipment

Code of Practice for Tandem Lifting with Two Excavator Cranes

Audit Protocol for Supply of Possession-only Rail Vehicles with and without Operators

Distributor Isolating Cock (DIC)

Code of Practice for Operator Competency Standards for On Track Plant

Code of Practice for Maintenance, Operation and Testing of Track Jacks

Rated Capacity Indicator (RCI) Status Indicator Lights

Code of Practice for Trailers and Attachments with RRVs and RMMMs

Code of Practice for Professional Driving of OTM