Standards Catalogue

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…

Track System Requirements

This document sets out Great Britain (GB) requirements in scope of the national technical rules for track geometry, track systems and track components…

Switches and Crossings

This document sets out requirements and guidance for new, renewed, and upgraded switches and crossings (S&C) to provide for identification and safe…

Changes to National Operations Publications for December 2023

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

This document sets out interface requirements and guidance for the alternating current (ac) energy subsystem for all rolling stock operating over…

ERTMS National Identities Management

This document sets out the requirements for arrangements for the management of the ERTMS National Identities on the GB mainline railway.

Infrastructure Based Train Detection Interface Requirements

Defective On-Train Equipment

This document sets out requirements to be applied when on-train equipment becomes defective and provides guidance to assist the railway undertakings…

Trespass Risk Assessment

This document provides a common framework for trespass risk assessments, developed from the outputs of RSSB research project T1183 - Good practice…

Passenger Train Dispatch and Platform Safety Measures

This document sets out requirements and guidance for the development, review and implementation of passenger train dispatch processes and measures to…

Process for Adding, Removing or Modifying Lettered Differential Permissible Speeds

This document sets out requirements and guidance to support the process of adding, removing or modifying a Lettered Differential Permissible Speed…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

This document sets out requirements and responsibilities for the assessment of technical compatibility at route level for vehicles and infrastructure.

Client Safety Assurance of High Integrity Software-Based Systems for Railway Applications

This document sets out requirements for safety assurance of high integrity software-based systems for railway applications.

Interface between Station Platforms, Track, Trains and Buffer Stops

RIS-7016-INS brings together requirements to provide an integrated and consistent set covering station platforms, the interface between platforms,…

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Track circuit block regulations

You will need this module if you carry out the duties of a signaller in a track circuit block area.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Indication of end of cab-signalling

This document provides design details for AB03 sign - Indication of end of cab-signalling.

TVM block marker

This document provides design details for AB04 sign - TVM block marker.

Cab signalling shunt entry board

This document provides design details for AB05 sign - Cab signalling shunt entry board.

Emergency telephone

This document provides design details for DB04 sign - Emergency telephone.

Radio electronic token block: loop clear marker

This document provides design details for AB06 sign - Radio electronic token block: loop clear marker.

Start / end of cab signalling directional arrows

This document provides design details for AB07 sign - Start / end of cab signalling directional arrows.

ETCS stop marker

This document provides design details for AB08 sign - ETCS stop marker.

ETCS block marker passable plate

This document provides design details for AB09 sign - ETCS block marker passable plate.

Temporary speed restriction termination indicator

This document provides design details for AF06 sign - Temporary speed restriction termination indicator.

Controlled signal identification plate

This document provides design details for AC01 sign - Controlled signal identification plate.

Code of Practice for Planning and Executing Lifting Operations

Leaf Fall Alert 2011

Code of Practice for Hiring In of Route Conductors

OTM Movements Involving Route Conductors

Code of Practice for Rail Mounted Manually Propelled Equipment

Code of Practice for Use and Loading of MEWPs

Code of Practice for M&EE Documents

Points Run Through

Code of Practice for Management of Operational Risk and SPAD Avoidance Strategy for On-track Machines (OTM)

RRV Braking Poster