Standards Catalogue

Procedure for Dealing with Notices from Outside Authorities on their Proposals to Install Cathodic Protection to Their Own Buried Structures Crossing or Adjacent to Electrified Lines

Specification for Transformer-Rectifier Units for General Railway Signalling Purposes

Level Crossing Circuits: Capacitor/Resistor Slugging Networks

Axle Counters: Electro Magnetic Interference

Instructions for the Installation and Removal of Traction Bonding on All Electrified Lines

Procedure for the Disconnection of Yellow" Bonds or Action when Reported Broken or Disconnected on A.C Electrified Lines"

Automatic Level Crossings Fitted with BR843 MK2 Barrier Machines - Made by Smiths Industries LTD

Instructions to Staff Seeking Evidence of cause of Serious Railway Accident

Instructions for Isolation and Earthing for Feeder Switch Maintenance for A.C Electrified Lines

Conditions Governing Construction Work by Outside Partied on Operational Land or on Non-Operational Land Affecting Operational Land

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

On-Track Plant, Trolleys and Associated Equipment

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Track circuit block regulations

You will need this module if you carry out the duties of a signaller in a track circuit block area.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Start / end of cab signalling directional arrows

This document provides design details for AB07 sign - Start / end of cab signalling directional arrows.

ETCS stop marker

This document provides design details for AB08 sign - ETCS stop marker.

ETCS block marker passable plate

This document provides design details for AB09 sign - ETCS block marker passable plate.

Temporary speed restriction termination indicator

This document provides design details for AF06 sign - Temporary speed restriction termination indicator.

Controlled signal identification plate

This document provides design details for AC01 sign - Controlled signal identification plate.

Distant signal sign and identification plate

This document provides design details for AC02 sign - Distant signal sign and identification plate.

Temporary speed restriction AWS cancelling indicator

This document provides design details for AF08 sign - Temporary speed restriction AWS cancelling indicator.

Automatic signal sign and identification plate

This document provides design details for AC03 sign - Automatic signal sign and identification plate.

Worksite entrance marker

This document provides design details for AG02 sign - Worksite entrance marker.

Level crossing warning sign

This document provides design details for AH01 sign - Level crossing warning sign.

Code of Practice for Planning and Executing Lifting Operations

Leaf Fall Alert 2011

Code of Practice for Hiring In of Route Conductors

OTM Movements Involving Route Conductors

Code of Practice for Rail Mounted Manually Propelled Equipment

Code of Practice for Use and Loading of MEWPs

Code of Practice for M&EE Documents

Points Run Through

Code of Practice for Management of Operational Risk and SPAD Avoidance Strategy for On-track Machines (OTM)

RRV Braking Poster