Standards Catalogue

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…

Track System Requirements

This document sets out Great Britain (GB) requirements in scope of the national technical rules for track geometry, track systems and track components…

Switches and Crossings

This document sets out requirements and guidance for new, renewed, and upgraded switches and crossings (S&C) to provide for identification and safe…

Changes to National Operations Publications for December 2023

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

On-Track Plant, Trolleys and Associated Equipment

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Rule Book Section Z (Part i) - AC electrified lines

Section T(ii) - Protection of engineering work when the engineer takes possession of the line

Section J - Shunting

Working Manual for Rail Staff - Freight Train Operations - Table A - Conversion Chart SLU's - Feet - Metres

Working Manual for Rail Staff - Freight Train Operations - Table C1 - Route Availability (RA)

Working Manual for Rail Staff - Freight Train Operations - Table C2 - Route Availability Assessment

Working Manual for Rail Staff- Freight Train Operations - Marshalling and Composition of Freight Trains

Working Manual for Rail Staff - Freight Train Operations - Movement of Freight Trains

Working Manual for Rail Staff - Freight Train Operations - Special Freight Trains and Wagons

Working Manual for Rail Staff (Pink Pages), Handling and Carriage of Dangerous Goods

750 V DC electrification boundary - entering

This document provides design details for AJ06 sign - 750 V DC electrification boundary - entering.

Entering and leaving an IVRS zone marker

This document provides design details for DC06 sign - Entering and leaving an IVRS zone marker.

Termination of AWS gap

This document provides design details for AA02 sign - Termination of AWS gap.

GSM-R signal box phone number sign

This document provides design details for DD02 sign - GSM-R signal box phone number.

Commencement of special AWS working

This document provides design details for AA03 sign - Commencement of special AWS.

Deviation for countdown markers

This document provides design details for DEV-AK102-01 sign - Deviation for station approach countdown markers Applicable to the South West Trains…

Termination of special AWS working

This document provides design details for AA04 sign - Termination of special AWS working.

Permanently installed AWS cancelling indicator

This document provides design details for AA05 sign - Permanently installed AWS cancelling indicator

Warning of the start of cab-signalling

This document provides design details for AB01 sign - Warning of the start of cab-signalling.

Indication of start of cab-signalling

This document provides design details for AB02 sign - Indication of start of cab-signalling.

Code of Practice for RRV & RMMM Machine / Crane Controller Checklists

Code of Practice for Tandem Lifting with Two Excavator Cranes

Code of Practice for On and Off Tracking of Road-Rail Vehicles

Code of Practice for Safe use of Quick Hitches

RCI Motion Cut During Tandem Lifting Poster

Leaf Fall Alert Poster

Code of Practice for Dynamic Brake Testing of RRVs

Code of Practice for M&EE Documents

Code of Practice for Handling Serviceable Rail with RRV Excavator Cranes including Thimbling

Code of Practice for Action to be Taken in the Event of an Accident or Incident Involving OTP