Standards Catalogue

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

Replacement Switches for Automatic Signals

Track Circuit Clearance Points

ATC (AWS) Brake Valve

ATC & (AWS) Receiver Junction Box

Specification for vulcanised rubber compound for automatic warning system

ATC (AWS) Receiver Plugs & Sockets, Receiver Twin Plug Assembly

ATC (AWS) Bell Plug & Socket

Type of Colour Light Lignal

Specification for Civil Engineering Standard Design Spring Steel Clips for Flat Bottom Track

ERTMS Handbook

You will need this handbook if you need to understand how the European Rail Traffic Management System (ERTMS) operates on the GB network.

Signaller's Form for Working Single and Bi-Directional ERTMS Lines by Pilot

Signaller's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Written Order 04 Permission to Make a Wrong-Direction Movement Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Pilot's form for working of single and bi-directional ERTMS lines by pilot

Pilot's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Signaller's Single Line Working Form

This form is used by the signaller to record the arrangements for implementing single line working.

Written Order 05 Permission To Proceed Under Modified Working Arrangements on Single and Bi-Directional Lines Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Duties of a designated person (DP) and people working on rail vehicles

You will need this module if you carry out the duties of a designated person or person working on a rail vehicle.

Pilot's form for working of single and bi-directional lines by pilot

This form is used by the pilot to record the details for the working of trains over single or bi-directional lines by pilot, during a failure or when…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…