Standards Catalogue

Route Level Assessment of Technical Compatibility between Rail Vehicles and Underline Bridges

This document sets out requirements and guidance for the assessment of compatibility between rail vehicles and underline bridges at route level on the…

Guidance on evaluating excessive dynamic effects in underline bridges

This document provides guidance on evaluating and managing the risk of excessive dynamic effects in underline bridges resulting from the operating…

Changes to National Operations Publications for June 2024

Fire safety of refurbished passenger seats​

This technical note provides guidance on the application of fire standards to existing vehicles undergoing refurbishment which affects passenger…

Public address interface to GSM-R

This technical note will help industry to determine GSM-R cab radio public address announcement priorities when integrated with the onboard public…

Driver’s Single Line Working Ticket

This form should be used by the driver when single line working applies.

On-Train Camera Monitoring Systems

This document sets out requirements for the installation and use of modern camera systems for the purposes of recording, storing, and accessing video…

Infrastructure Based Train Detection Interface Requirements

This standard specifies the infrastructure based train detection system parameters that are necessary to support technical compatibility with GB…

Guidance on the Application of the Control of Electromagnetic Fields at Work Regulations

This document gives guidance on the application of the Control of Electromagnetic Fields at Work Regulations in the railway environment, and…

Changes to National Operations Publications for March 2024

Recording of Rolling Stock Data

This document provides a standard on rolling stock shared data. Recording of some data is mandatory to register a vehicle; other data may be useful,…

CCS System Transitions

This standard sets out requirements for controlling the hazards that arise when a train changes from using one type of signalling system, or train…

Application of the PRM NTSN

This document contains guidance on the application of the PRM NTSN, particularly when undertaking work that would not necessarily constitute an…

Rail Vehicle Structures

This document sets out requirements and guidance for the design of rail vehicle structures. A related document (SD001 issue two) contains all the…

System Requirements for the Introduction and Operation of Multi-Mode Rolling Stock

This document sets out requirements and guidance to support the introduction and operation of multi-mode rolling stock onto the Great Britain (GB)…

Rail Vehicle Structures and Passive Safety

Application of human factors within safety management systems

This document provides guidance on the application of human factors principles for railway organisations. It has been developed to support…

AWS and TPWS Application Requirements

This document sets out requirements and guidance for the application of the United Kingdom (UK) Class B train protection system ‘TPWS’, which…

AWS and TPWS Interface Requirements

This document defines the track/train interface requirements for the United Kingdom (UK) Class B train protection system ‘TPWS’, which comprises the…

ERTMS/ETCS DMI National requirements

This document sets out requirements for European Rail Traffic Management System/ European Train Control System (ERTMS/ETCS) Driver Machine Interface…

Preparation and movement of trains on ERTMS lines

Preparation and movement of trains on ERTMS lines: Defective or isolated vehicles and on-train equipment

Failure of, or work on, signalling equipment on ERTMS lines - signallers' regulations

ERTMS Rule Book Briefing Leaflet

ERTMS Rule Book Module Issue History

Changes to National Operations Publications for December 2013

Train Trip or Unauthorised Movement Form

Reporting an ERTMS Failure or Irregularity Form

Release of signalling controls

For use by signallers and signalling technicians.

Signal engineering work

For use by signallers and signalling technicians.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.