Standards Catalogue

Preparation and working of freight trains

You will need this module if you carry out the duties of the following in relation to freight trains: train driver, guard, shunter, train preparer.

Dealing with a train accident or train evacuation

You will need this module if you carry out the duties of a driver, guard or signaller.

Duties of the COSS and person in charge when using a hand trolley

You will need this handbook if you are the COSS or SWL and person in charge when using a hand trolley.

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Signal Passed at Danger (SPAD) or Train Trip or Unauthorised Movement

For use by signallers in cases of a SPAD being investigated.

Station duties and train dispatch

You will need this module if you carry out the duties of a driver, a guard, a person in charge (PIC) of dispatch or staff responsible for train…

Observing and obeying signalling indications. Train warning systems. Reporting signalling failures and irregularities

You will need this module if you carry out the duties of a driver, person controlling train movements, shunter or signaller.

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

Provision of Signage at Power Changeover Locations

This document sets out requirements and guidance for provision of signage at power changeover locations for multi-mode rolling stock.

Maintaining the Visibility of Signals and Operational Signs

This document sets out requirements and guidance to ensure that the visibility of signals and operational signs are not adversely affected during the…

Medical Fitness Assessment

This document sets out requirements and guidance for the management of medical fitness assessment for safety critical workers on the GB mainline…

Lineside Operational Signs

This document sets out requirements, rationale and guidance for the application of lineside operational signs published in the RSSB catalogue. It also…

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Reference Limits for Freight Wagon Defects

This document sets out the criteria for addressing defects in freight wagons arising during operation, and the restrictions on their use that apply.

Requirements for the operation of freight trains and the conveyance of dangerous goods by any train

This document sets out requirements and guidance relating to the safe operation of freight trains and the safe movement of dangerous goods.

Proceed-on-Sight Authority (PoSA)

You will need this module if your duties require you to identify and understand the meaning of PoSA signals. This document has be updated as part of…

Trains or shunting movements detained on running lines

You will need this module if you carry out the duties of a driver, shunter or signaller.

IWA or COSS setting up safe systems of work within possessions on ERTMS lines where lineside signals are not provided

You will need this handbook if you are an IWA or COSS setting up safe systems of work within ERTMS possessions. This document has been updated as part…

Instructions for track workers who use emergency protection equipment

This handbook is for those personnel who need to go on the operational railway to carry out their duties, and have been trained to carry out emergency…

Duties of the person in charge of the possession (PICOP) on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the person in charge of the possession (PICOP) on ERTMS lines. This document has been…

Engineering Supervisor's Certificate

Engineering supervisor's certificate for use on ERTMS level 2 without lineside signals routes.

Duties of a level crossing attendant

You will need this handbook if you carry out the duties of a level crossing attendant. This document has be updated as part of the December 2015 Rule…

Possession arrangements form (T3 ERTMS)

Possession arrangements form (T3 ERTMS) for use on ERTMS level 2 without lineside signals routes.

Pink Pages Briefing Leaflet

Managing incidents, floods and snow

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Seat belts

This poster is provided by the M&EE Networking Group to remind industry that wearing the seat belt could save your life.

Safety within depot yards and sidings

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by train movements within depot yards and sidings.

Code of Practice Planning for the Use of Mobile Operated Plant

This Code of Practice details minimum requirements for planning for the use of mobile operated plant excluding lifting operations. It applies to…

Code of Practice for Loading of OTP

This Code of Practice gives guidance on the arrangements for loading and securing of typical loads associated with all on-track plant (OTP) whilst on…

Points run through

This poster is provided by the M&EE Networking Group to remind industry that points run throughs only occur when the rules are not followed.

Code of Practice for Rail Mounted Manually Propelled Equipment

This Code of Practice details the use and some aspects of the design and maintenance of rail mounted manually propelled equipment (trolleys and…

Objects left on the line

This poster is provided by the M&EE Networking Group to remind industry of the measures to take to reduce the hazard of objects being left on the…

Use of Mobile Devices

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by using a mobile phone whilst driving a train. Further…

Code of Practice for OTM Route Conducting Policy

This Code of Practice contains requirements and guidance for OTM driver’s route conducting or being conducted. Also to assist in the improvement of…

Code of Practice for Control of Mobile Communication Equipment use in Driving Cabs

This Code of Practice contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains. It sets…