Standards Catalogue

Station duties and train dispatch

You will need this module if you carry out the duties of a driver, a guard, a person in charge (PIC) of dispatch or staff responsible for train…

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Duties of the COSS and person in charge when using a hand trolley

You will need this handbook if you are the COSS or SWL and person in charge when using a hand trolley.

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Engineering Requirements for Steam Locomotives and other Heritage Rail Vehicles

This document sets out the engineering requirements for heritage rail vehicles (including steam locomotives) to support use when operating in heritage…

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

Track to Train RFID Compatibility

This document sets out requirements for RFID compatibility between train and track, including management of application codes.  

Operational Requirements for GSM-R Radio

This document contains the necessary requirements and guidance for the development of contingency plans to manage failures of the GSM-R voice system.…

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

ERTMS National Identities Management

This document sets out the requirements for arrangements for the management of the ERTMS National Identities on the GB mainline railway.

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements and guidance for new, renewed and upgraded ac energy subsystem, and the interfaces to rolling stock and operation…

Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

This document sets out interface requirements and guidance for the alternating current (ac) energy subsystem for all rolling stock operating over…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the alternating current (ac) energy subsystem and the interfaces to rolling stock operating over the ac…

Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

This document sets out interface requirements to the alternating current (ac) energy subsystem for all rolling stock operating over the Great Britain…

Infrastructure Based Train Detection Interface Requirements

Train front-end visibility requirements and safe integration

This technical note clarifies the application of standards and legislation for front-end visibility and safe integration of rolling stock within the…

Process for Adding, Removing or Modifying Lettered Differential Permissible Speeds

This document sets out requirements and guidance to support the process of adding, removing or modifying a Lettered Differential Permissible Speed…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

This document sets out requirements and responsibilities for the assessment of technical compatibility at route level for vehicles and infrastructure.

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Changes to National Operations Publications for March 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

AC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper or person…

AC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an AC electrified area to carry out their duties, with the exception…

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000).

DC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an DC electrified area to carry out their duties, with the exception…

DC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This covers the use of plant…

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…