Standards Catalogue

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Signal Passed at Danger (SPAD) or Train Trip or Unauthorised Movement

For use by signallers in cases of a SPAD being investigated.

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

Engineering Requirements for Steam Locomotives and other Heritage Rail Vehicles

This document sets out the engineering requirements for heritage rail vehicles (including steam locomotives) to support use when operating in heritage…

Operational Requirements for GSM-R Radio

This document contains the necessary requirements and guidance for the development of contingency plans to manage failures of the GSM-R voice system.…

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Rail Industry Standard for the Design of On-track Machines in Working and Travelling Modes

Compatibility Requirements for Track Circuit Assisters (TCAs) on Rail Vehicles

This sets out Great Britain (GB) requirements on where TCAs shall be fitted onto a vehicle and how they shall be set up.

Functionality and Management of Track Circuit Assisters (TCAs) on Rail Vehicles

This document sets out requirements for the functionality, testing and management of failures of TCAs on rail vehicles.

Recommendations for the Risk Assessment of Buffer Stops and End Impact Walls

This document gives details of a recommended method which, if followed, would meet the requirements of section 11, Buffer Stops and End Impact Walls,…

Rail Industry Standard for Station Infrastructure

This document has been published to provide a voluntary standard on station infrastructure, for infrastructure managers responsible for managing and…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

GB Requirements for Platform Height, Platform Offset and Platform Width

Interface between Station Platforms, Track, Trains and Buffer Stops

Requirements for the Position of Infrastructure and for Defining and Maintaining Clearances

Requirements for the Size of Vehicles and Position of Equipment

Section B(ii) - Your safety when you are walking in a group or working on or near the line

Section B(iii) - Your general duties when you are on or near the line

Section D - Passing signals at danger and making movements in the wrong direction

Section H(ii) - Working of trains - out of course working, defective vehicles and on-train equipment

Section T(ii) - Protection of the line for engineering work

Floods and snow

Managing accidents

G1 - General safety responsibilities

M2-Train stopped by train failure

Working of on-track machines (OTM) outside a possession

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.