Standards Catalogue

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Signal Passed at Danger (SPAD) or Train Trip or Unauthorised Movement

For use by signallers in cases of a SPAD being investigated.

Station duties and train dispatch

You will need this module if you carry out the duties of a driver, a guard, a person in charge (PIC) of dispatch or staff responsible for train…

Observing and obeying signalling indications. Train warning systems. Reporting signalling failures and irregularities

You will need this module if you carry out the duties of a driver, person controlling train movements, shunter or signaller.

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

Engineering Requirements for Steam Locomotives and other Heritage Rail Vehicles

This document sets out the engineering requirements for heritage rail vehicles (including steam locomotives) to support use when operating in heritage…

Operational Requirements for GSM-R Radio

This document contains the necessary requirements and guidance for the development of contingency plans to manage failures of the GSM-R voice system.…

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Traction batteries in rolling stock depots

The technical note aims to inform the industry on handling, storage and the safe maintenance practices of lithium-ion traction battery packs within…

Fire compartmentation and Li-ion traction batteries

The technical note aims to inform the industry on adequate design considerations for crashworthiness and fire barrier considerations to minimise the…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Train Operations Staff Manual

Track Workers Manual

Glossary of Railway Terminology

Duties of the machine controller (MC) and on-track plant operator

Rule Book Module Issue History

Safe work leader (SWL) blocking a line

IWA, COSS or PC blocking a line

General Signalling Regulations

Level crossings - drivers' instructions

Preparation and movement of trains

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Autumn / winter and low adhesion operations of OTP Poster

Code of Practice for Loading of MEWPs

On Track Plant (OTP) towed loads Poster

Tandem Lifting Poster

Code of Practice for OTM Operational Risk and SPAD Mitigation Strategy

Code of Practice for Demountable MEWP and Lifting Equipment

Application Note 7 - The Yellow Book, Safety Management Systems and the ROGS Regulations

Application Note 8 - Safety Management and Standards

Code of Practice for Planning the Use of OTP

Code of Practice for OTM Professional