Standards Catalogue

Examination and repair of structural corrosion in Mark 1 type rolling stock

This technical note will help those maintaining or repairing Mark 1 type rolling stock to detect and remedy corrosion on this type of vehicle. This…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Reporting of adverse events

This technical note will help industry to understand the reporting systems for safety related issues provided by the Rail Safety and Standards Board…

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Management of Safety-Related Rail Vehicle Defects

This document defines requirements for recording, analysing and reporting safety-related defects, faults and failures on rail vehicles, plant and…

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Electromagnetic Compatibility of Train Detection Infrastructure with Rail Vehicles

Railway Wheelsets

Rail Industry Standard for Wheelsets

Engineering Requirements for Steam Locomotives and other Heritage Rail Vehicles

Track to Train RFID Compatibility

Supplier Assurance

Vehicle Registration, Marking and Numbering

Arrangements Concerning the Non-Operation of Track Circuits During the Leaf Fall Contamination Period

This document details the requirements for identifying the need for, introduction and subsequent removal of, restrictions to normal operations to…

ERTMS/ETCS National Values

This Rail Industry Strandard (RIS) contains requirements and guidance for a process to determine or revise a set of values of ERTMS/ETCS National…

Ground Frames and Shunters' Releases

This document sets out the interface requirements for ground frames and shunters' releases that may be operated by railway undertaking personnel.

AWS and TPWS Handbook

You will need this document if you carry out the duties of a driver or signaller. Information on changes to this issue can be found in the Rule Book…

Proceed-on-Sight Authority (PoSA)

You will need this module if your duties require you to identify and understand the meaning of PoSA signals. This document has be updated as part of…

Trains or shunting movements detained on running lines

You will need this module if you carry out the duties of a driver, shunter or signaller.

IWA or COSS setting up safe systems of work within possessions on ERTMS lines where lineside signals are not provided

You will need this handbook if you are an IWA or COSS setting up safe systems of work within ERTMS possessions. This document has been updated as part…

Instructions for track workers who use emergency protection equipment

This handbook is for those personnel who need to go on the operational railway to carry out their duties, and have been trained to carry out emergency…

Duties of the person in charge of the possession (PICOP) on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the person in charge of the possession (PICOP) on ERTMS lines. This document has been…

Engineering Supervisor's Certificate

Engineering supervisor's certificate for use on ERTMS level 2 without lineside signals routes.

Duties of a level crossing attendant

You will need this handbook if you carry out the duties of a level crossing attendant. This document has be updated as part of the December 2015 Rule…

Possession arrangements form (T3 ERTMS)

Possession arrangements form (T3 ERTMS) for use on ERTMS level 2 without lineside signals routes.

Pink Pages Briefing Leaflet

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.