Standards Catalogue

Communication of urgent operating advice

This standard sets out requirements, rationale and guidance for reporting and communicating urgent operating safety information.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

Changes to National Operations Publications for June 2023

Guidance on Operational Railway Safety Awareness

Engineering change (software and firmware)

This technical note provides signposts to existing standards and good practice in engineering change management relating to software and…

Freight coupler loads

This technical note will help industry assess the ability of a locomotive to haul loads over a route. It focuses on coupler load capacity and…

Fire-related properties of batteries

This technical note sets out options for improving fire performance of batteries in use on GB mainline rolling stock, and the factors which may need…

Managing Train Accident Risk Arising from Train Operations

This document sets out requirements and guidance for the management of train accident risk arising from train operations as part of the GB rail…

Requirements for the Position of Infrastructure and for Defining and Maintaining Clearances

This document sets out requirements for positioning infrastructure and maintaining the position of track relative to infrastructure to achieve gauge…

Railway Wheelsets

This document sets out requirements for the design, manufacture and maintenance of wheelsets and their components. Access the tread profile…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document provides GB requirements for exterior doors and Selective Door Operation (SDO) systems.

The Management of Packet 44 Applications

Guidance on High-Integrity Software-Based Systems for Railway Applications

In-Service Examination and Reference Limits for Freight Wagons

Weekly Operating Notice, Periodical Operating Notice and the Sectional Appendix

This document sets out the arrangements for the production of information relating to engineering work, alterations to track and signalling…

Guidance on the Application of the Control Command and Signalling TSI

This guidance note has been produced to provide application guidance on the CCS TSI. The CCS TSI was adopted by Commission Regulation (EU) 2016/919/EC…

Positioning of Lineside Telephones

This document sets out the requirements for assessing the positioning of lineside operational telephones and the provision of information labels.

Information for Safe Train Operation

This document sets out requirements for information to be provided by the railway undertaking to the infrastructure manager regarding train running on…

Provision of Information and Signs for Access on the Railway

Operational Security Response Planning

Working Manual for Rail Staff Handling and Carriage of Dangerous Goods - Appendix 1 - List of Dangerous Goods with their United Nations Number, Dangerous Goods Class and TOPS Commodity Code

General safety responsibilities and personal track safety for non-track workers

Changes to National Operations Publications for December 2020

Rule Book Briefing Leaflet

Train Driver Manual

Train Operations Staff Manual

Track Workers Manual

Preparation and movement of trains

General duties and track safety for track workers

Master Module Manual

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.