Standards Catalogue

Train Driver Manual

Rule Book Briefing Leaflet

Preparation and movement of trains

Preparation and Working of Freight Trains

List of Dangerous Goods and their United Nations Numbers

Corrosion of rail vehicles

This technical note will help those maintaining or repairing rolling stock in detecting, and if appropriate, remedying corrosion. It covers current…

ERTMS National Identities Management

This document sets out the requirements for arrangements for the management of the ERTMS National Identities on the GB mainline railway.

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements and guidance for new, renewed and upgraded ac energy subsystem, and the interfaces to rolling stock and operation…

Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

This document sets out interface requirements and guidance for the alternating current (ac) energy subsystem for all rolling stock operating over…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Sanding Equipment

Compatibility Requirements for Braking Systems of Rail Vehicles

This document defines the compatibility and performance requirements for the braking systems of rail vehicles for operation in trains on the mainline…

Rail Industry Standard for Verification of Conformity of Engineering Change to Rail Vehicles

Rail Industry Standard for the Identification of Roller Bearings Defects

Managing Drivers on Routes Undergoing Significant Change - Good Practice Guide

This Good Practice Guide (GPG) on managing drivers on routes undergoing sifnificant change represents a collation of RSSB research and good practice…

Guidance on the Use of On-Train Satellite Positioning Technology Based Locator for Railway Applications

This document provides guidance on good practice for the specification, selection, implementation, and installation of on-train satellite positioning…

Audibility and Visibility of Trains

This document mandates requirements for audible and visible warning devices such that an approaching train is clearly visible and audible to members…

Guidance on Gauging and Platform Distances

Assessment of Compatibility of Rolling Stock and Infrastructure - Gauging and Stepping Distances

Assessment of Route Compatibility of Vehicles and Infrastructure.

ERTMS Handbook

You will need this handbook if you need to understand how the European Rail Traffic Management System (ERTMS) operates on the GB network.

Signaller's Form for Working Single and Bi-Directional ERTMS Lines by Pilot

Signaller's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Written Order 04 Permission to Make a Wrong-Direction Movement Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Pilot's form for working of single and bi-directional ERTMS lines by pilot

Pilot's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Signaller's Single Line Working Form

This form is used by the signaller to record the arrangements for implementing single line working.

Written Order 05 Permission To Proceed Under Modified Working Arrangements on Single and Bi-Directional Lines Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Duties of a designated person (DP) and people working on rail vehicles

You will need this module if you carry out the duties of a designated person or person working on a rail vehicle.

Pilot's form for working of single and bi-directional lines by pilot

This form is used by the pilot to record the details for the working of trains over single or bi-directional lines by pilot, during a failure or when…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…