Standards Catalogue

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document sets out requirements for the alternating current (ac) energy subsystem and the interfaces to rolling stock operating over the ac…

Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

This document sets out interface requirements to the alternating current (ac) energy subsystem for all rolling stock operating over the Great Britain…

Changes to National Operations Publications for December 2022

Infrastructure Based Train Detection Interface Requirements

Train front-end visibility requirements and safe integration

This technical note clarifies the application of standards and legislation for front-end visibility and safe integration of rolling stock within the…

Electric token block regulations

You will need this module if you carry out the duties of a signaller in an electric token block area.

Tokenless block regulations

You will need this module if you carry out the duties of a signaller in a tokenless block area.

No-signaller token regulations

You will need this module if you carry out the duties of a signaller in a no-signaller token area. You will also need module TS8 One-train working…

One-train working regulations

You will need this module if you carry out the duties of a signaller in a one-train working area, whether or not a train staff is provided, and a…

Possession of an ERTMS running line for engineering work where lineside signals are not provided

You will need this module if you carry out the duties of a driver or signaller.

AWS and TPWS Application Requirements

Rail Industry Standard for Accident and Incident Investigation

Engineering Certification of Railborne Plant and the Assessment of Non-Railborne Plant

Signing of Permissible Speeds

Signing of Temporary and Emergency Speed Restrictions

Sanding Equipment

Guidance on the Safety in Railway Tunnels Technical Specification for Interoperability

This document gives guidance on interpreting the requirements of the Safety in Railway Tunnels Technical Specification for Interoperability (SRT TSI).…

Guidance for the Development and Design Considerations of Passenger Rolling Stock Depots

This document provides guidance to industry to inform the development and design of passenger rolling stock depots. From the point at which a depot is…

Signalling Lockout Systems to Protect Railway Undertaking Personnel

This document sets out requirements and guidance for signalling lockout systems provided or railway undertaking personnel to use.

Provision of Information and Signs for Access on the Railway

This document sets out requirements for the provision of information about access to and alongside the railway. It specifies where operational safety…

General duties and track safety for track workers

General duties of a safe work leader (SWL) working outside a possession

General duties of an individual working alone (IWA)

Wrong-direction movements

Master Module Manual

Track Workers Manual

Signaller and Signalling Technician Manual

Train Driver Manual

Preparation and movement of trains

Rule Book Briefing Leaflet

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…