Standards Catalogue

Track circuit block regulations

ERTMS Handbook

You will need this handbook if you need to understand how the European Rail Traffic Management System (ERTMS) operates on the GB network.

Process for Adding, Removing or Modifying Lettered Differential Permissible Speeds

This document sets out requirements and guidance to support the process of adding, removing or modifying a Lettered Differential Permissible Speed…

Signaller's Form for Working Single and Bi-Directional ERTMS Lines by Pilot

Signaller's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Written Order 04 Permission to Make a Wrong-Direction Movement Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Pilot's form for working of single and bi-directional ERTMS lines by pilot

Pilot's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Signaller's Single Line Working Form

This form is used by the signaller to record the arrangements for implementing single line working.

Written Order 05 Permission To Proceed Under Modified Working Arrangements on Single and Bi-Directional Lines Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Lineside Signal Aspects and Indications

This document specifies the appearance of lineside signal aspects and indications and the information they convey.

Lineside Signalling Layout Driveability Assessment Requirements

This document sets out requirements for assessing the driveability of lineside signalling systems, and guidance on the process of assessing changes to…

Signalling Layout and Signal Aspect Sequence Requirements

750 V and 1500 V DC Overhead Lines and corresponding Rolling Stock requirements

This document specifies requirements and associated rationale and guidance at the interface between energy subsystems and rolling stock subsystems for…

Magnetic Track Brakes

This document sets out requirements for driver-actuated magnetic track brakes fitted to rail vehicles used on the GB mainline railway.

Train to Infrastructure RFID Compatibility

This document sets out requirements for an RFID system where the tag is on the train and the reader is on the infrastructure. It includes specific…

Guidance on the Use of Escrow Agreements for Rail Applications

This document provides guidance on the use of escrow agreements and is intended to assist in understanding the application of escrow agreements. The…

Reporting of Safety Related Information

This document sets out requirements for entering information into the industry's Safety Management Intelligence System (SMIS), and for how that…

Calculation of Enhanced Permissible Speeds for Tilting Trains

This document sets out requirements and guidance for train manufacturers or operators to calculate enhanced permissible speeds for curves on a…

Guidance Note for Safe Integration of CCS Systems with Train Operations

This document provides guidance on assessment of changes that affect the interfaces between Control Command and Signalling (CCS) systems and train…

Pink Pages Briefing Leaflet

Working Manual for Rail Staff Handling and Carriage of Dangerous Goods - Appendix 1 - List of Dangerous Goods with their United Nations Number, Dangerous Goods Class and TOPS Commodity Code

Changes to National Operations Publications for December 2018

Line Blockage Form

This form is used by the Signaller, IWA, COSS, PC and SWL to record the details of a line blockage

ERTMS level 2 train signalling regulations

Regulations for train signalling by the European rail traffic management system (ERTMS). You will need this module if you carry out the duties of a…

Emergency Special Working Ticket

This form is to be used by the driver and signaller during emergency special working.

Train stopped by train failure

Rule Book Hand Book Issue History

AC electrified lines

AC electrified lines

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.