Standards Catalogue

Track circuit block regulations

ERTMS Handbook

You will need this handbook if you need to understand how the European Rail Traffic Management System (ERTMS) operates on the GB network.

Process for Adding, Removing or Modifying Lettered Differential Permissible Speeds

This document sets out requirements and guidance to support the process of adding, removing or modifying a Lettered Differential Permissible Speed…

Signaller's Form for Working Single and Bi-Directional ERTMS Lines by Pilot

Signaller's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Written Order 04 Permission to Make a Wrong-Direction Movement Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Pilot's form for working of single and bi-directional ERTMS lines by pilot

Pilot's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Signaller's Single Line Working Form

This form is used by the signaller to record the arrangements for implementing single line working.

Written Order 05 Permission To Proceed Under Modified Working Arrangements on Single and Bi-Directional Lines Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Changes to Specified Operations Publications for December 2005

GERT8000-AM - Amendments module

G1 - General safety responsibilities

Briefing leaflet

Rule Book index

Rule Book module issue history

Changes to Specified Operations Publications for October 2005

Changes to Specified Operations Publications for August 2005

Engineering Supervisor's Certificate (June 2005)

Briefing leaflet

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Use of warning horn

This poster is provided by the M&EE Networking Group to remind the industry about the use of the warning horn.

Code of Practice for Plant Any Line Open (ALO) Working

Code of Practice Protection of Non PTS Holders at OTM Stabling Points

This Code of Practice concerns all OTM stabling points and can be used when non PTS holders need to visit site. The document has been written to…

Code of Practice for Use and Loading of MEWPs

This Code of Practice details the use of MEWPs, particularly with processes for loads that should safely be permitted in the work platform of a MEWP.…

Points run throughs

Code of Practice Planning for the Use of Mobile Operated Plant

Injection Injury

Code of Practice for Action to be Taken in the Event of an Accident or Incident Involving OTP

This Code of Practice details the actions to be taken, and by whom, following an accident or incident involving OTP.  It deals with the engineering…

Code of Practice for Management of Points within Engineering Work Sites

This Code of Practice is to provide guidance on the arrangements for the Management of Points within Engineering Worksites for all rail borne vehicles…

Pulling Rail with Road-Rail Excavator Cranes

This Code of Practice provides good practice in the safe pulling of continuous welded rail (CWR) and to minimise the risk of damage to the CWR or…