Standards Catalogue

Duties of the engineering supervisor (ES) or safe work leader (SWL) in a possession on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the ES or SWL on ERTMS lines.

Defective On-Train Equipment

This document sets out requirements to be applied when on-train equipment becomes defective and provides guidance to assist the railway undertakings…

Single Line Working

You will need this module if you carry out the duties of a driver, pilot or signaller.

Working single and bi-directional lines by pilot

You will need this module if you carry out the duties of a driver, pilot or signaller.

Pilot's form for working of single and bi-directional lines by pilot

This form is used by the pilot to record the details for the working of trains over single or bi-directional lines by pilot, during a failure or when…

Signaller's Form for Working Single and Bi-Directional Lines by Pilot

This form is used by signallers to record the details for the working of trains over a single or bi-directional line by pilot, during a failure or…

Client Safety Assurance of High Integrity Software-Based Systems for Railway Applications

This document sets out requirements for safety assurance of high integrity software-based systems for railway applications.

Rule Book Handbook Issue History

Preparation and movement of trains: Defective or isolated vehicles and on-train equipment

Changes to National Operations Publications for September 2022

Use of Switches and Microswitches

Signal Lamp Voltages

Last Wheel Signal Replacement

Clamp Lock Power Pack: Power/Manual Selector Switch Movement

Indications Associated with Trains Starting from Platforms

Procedure for the Special Action Required for A.C Electrified Lines in those Jointless Track Circuit Areas Listed in Appendix A

Specification for Additional Earthing and Bonding Requirements for A.C Electrified Lines in those Joinless Track Circuit Areas Listed in Appendix A

Switch and Crossing Maintenance

Meshed Circuits - Some Cautionary Tales

Shunting Signals

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signals, Handsignals, Indicators and Signs Handbook

You will need this handbook if you need to understand the meaning of signals, handsignals, indicators and signs.

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000).

DC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an DC electrified area to carry out their duties, with the exception…

DC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

Gradient sign

This document provides design details for AK202 - Gradient sign

Spring catch board

This document provides design details AK204 sign - Spring catch board.

Train class specific instruction

This document provides design details for AK206 sign - Train class specific instruction.

Coasting board

This document provides design details for AK208 sign - Coasting board.

Warnings for train crew

This document provides design details for AK210 sign - Warnings for train crew.

Infrastructure location names, information and references

This document provides design details for AK212 sign - Infrastructure location names, information and references.

Warnings

This document provides design details for BA02 sign - Warnings.

Termination of adhesion condition

This document provides design details for AK214 sign - Termination of adhesion condition

Mind the gap / step

This document provides design details for CA02 sign - Mind the gap / step.

Telephone number

This document provides design details for DA01 sign - Telephone number

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…