Standards Catalogue

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Reference Limits for Freight Wagon Defects

This document sets out the criteria for addressing defects in freight wagons arising during operation, and the restrictions on their use that apply.

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Engineering Design of On-Track Machines in Travelling and Working Modes

This document sets out requirements and guidance for the application of the BS EN 14033:2017 series for on-track Machines (OTMs) in their travelling…

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Requirements for the operation of freight trains and the conveyance of dangerous goods by any train

This document sets out requirements and guidance relating to the safe operation of freight trains and the safe movement of dangerous goods.

Signals, Handsignals, Indicators and Signs Handbook

You will need this handbook if you need to understand the meaning of signals, handsignals, indicators and signs.

Lineside Operational Signs

This document sets out requirements, rationale and guidance for the application of lineside operational signs published in the RSSB catalogue. It also…

Junction signal sighting

This technical note has been issued to help the industry manage the sighting of colour light junction signals. This document is responding to the RAIB…

Examination and repair of structural corrosion in Mark 1 type rolling stock

This technical note will help those maintaining or repairing Mark 1 type rolling stock to detect and remedy corrosion on this type of vehicle. This…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Reporting of adverse events

This technical note will help industry to understand the reporting systems for safety related issues provided by the Rail Safety and Standards Board…

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Management of Safety-Related Rail Vehicle Defects

This document defines requirements for recording, analysing and reporting safety-related defects, faults and failures on rail vehicles, plant and…

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Changes to National Operations Publications for March 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

AC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper or person…

AC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an AC electrified area to carry out their duties, with the exception…

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000).

DC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an DC electrified area to carry out their duties, with the exception…

DC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Use of warning horn

This poster is provided by the M&EE Networking Group to remind the industry about the use of the warning horn.

Code of Practice for Plant Any Line Open (ALO) Working

Code of Practice Protection of Non PTS Holders at OTM Stabling Points

This Code of Practice concerns all OTM stabling points and can be used when non PTS holders need to visit site. The document has been written to…

Code of Practice for Use and Loading of MEWPs

This Code of Practice details the use of MEWPs, particularly with processes for loads that should safely be permitted in the work platform of a MEWP.…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Points run throughs

Code of Practice Planning for the Use of Mobile Operated Plant

Code of Practice for Action to be Taken in the Event of an Accident or Incident Involving OTP

This Code of Practice details the actions to be taken, and by whom, following an accident or incident involving OTP.  It deals with the engineering…

Code of Practice for Management of Points within Engineering Work Sites

This Code of Practice is to provide guidance on the arrangements for the Management of Points within Engineering Worksites for all rail borne vehicles…

Pulling Rail with Road-Rail Excavator Cranes

This Code of Practice provides good practice in the safe pulling of continuous welded rail (CWR) and to minimise the risk of damage to the CWR or…