Standards Catalogue

Inspection and Use of Engineer's Cold Chisels and Hot/Cold Setts

Head Protection

High Visibility Clothing

Safety of Staff on Lines Signalled for Bi-Directional Working

Switch and Crossing Tamping Machines: Clearance Implications

Safety Precautions in the use of Herbicides

Lifting Plain Rails

Lifting Track Panels Using Four Legged Chain Slings

Safety in Tunnels

Use of Bitumen Boilers

High Visibility Clothing

This document sets out the minimum requirements for high-visibility clothing.

Spoken Safety Critical Communications

This document sets out requirements for spoken safety critical communications, including monitoring.

Approval of Changes to Axle Bearing Lubricants

This document gives guidance on applying the requirements of RIS-2700-RST when making changes to axle bearing greases that have been approved and…

Confidential Reporting System for Rail Staff

Rail Vehicle Lettered Differential Speeds Classification

Index for Lineside Signs

Resistance of Railway Vehicles to Roll-Over in Gales

This document mandates requirements to be applied to railway vehicles so that they can operate under gale conditions in Great Britain. It applies to…

Guidance on the Locomotives and Passenger Rolling Stock TSI

Guidance Note on the Provision of Lineside Telephones

This document provides guidance to Infrastructure Managers on criteria that may be considered when deciding on the provision of lineside telephones…

Infrastructure Based Train Detection Systems

This document sets out requirements and guidance on infrastructure based train detection systems.

Dealing with a train accident or train evacuation

You will need this module if you carry out the duties of a driver, guard or signaller.

Duties of the COSS and person in charge when using a hand trolley

You will need this handbook if you are the COSS or SWL and person in charge when using a hand trolley.

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Signal Passed at Danger (SPAD) or Train Trip or Unauthorised Movement

For use by signallers in cases of a SPAD being investigated.

Station duties and train dispatch

You will need this module if you carry out the duties of a driver, a guard, a person in charge (PIC) of dispatch or staff responsible for train…

Observing and obeying signalling indications. Train warning systems. Reporting signalling failures and irregularities

You will need this module if you carry out the duties of a driver, person controlling train movements, shunter or signaller.

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.