Standards Catalogue

Specification for Transformer-Rectifier Units for General Railway Signalling Purposes

Instructions for the Installation and Removal of Traction Bonding on All Electrified Lines

Procedure for the Disconnection of Yellow" Bonds or Action when Reported Broken or Disconnected on A.C Electrified Lines"

Level Crossing Circuits: Capacitor/Resistor Slugging Networks

Automatic Level Crossings Fitted with BR843 MK2 Barrier Machines - Made by Smiths Industries LTD

Axle Counters: Electro Magnetic Interference

Conditions Governing Construction Work by Outside Partied on Operational Land or on Non-Operational Land Affecting Operational Land

Instructions for Isolation and Earthing for Feeder Switch Maintenance for A.C Electrified Lines

Instructions to Staff Seeking Evidence of cause of Serious Railway Accident

Special Inspection Notice (SIN) Monitoring

AWS and TPWS Interface Requirements

Rail Industry Standard for Compatibility for Rail Vehicle Couplings and Interconnectors

RIS-2790-RST issue one is a Rail Industry Standard on the capability of rail vehicle mechanical, electrical and pneumatic couplings and…

Guidance on Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

Rolling Stock Subsystem and Interface to AC Energy Subsystem

Guidance on AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

Guidance on Lineside Signal and Indicator Product Design and Assessment Requirements

Lineside Signals, Indicators and Layout of Signals

Guidance on Lineside Signals, Indicators and Layout of Signals

Lineside Signal Aspect and Indication Requirements

Section N - Single line working

Personalised Rule Book No. 13 - Person in charge of work on signalling equipment

Section B(iii) - Your general duties when you are on or near the line

Section F(ii) - Your duties if you are acting as a handsignaller

Section Q(ii) - Rail mounted maintenance machines

Section T(iii) - Protection of engineering work when the engineer takes possession of the line

Section U(i) - Temporary speed restrictions

Section Y - Accidents

Section B(i) - Your safety when you are walking on or near the line

Section B(iii) - Your general duties when you are on or near the line

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.