Standards Catalogue

Policy and Instruction for the Design of Signalling Works

Procedure for the Inspection of Bonds Attached to Scaffolding on A.C Electrified Lines

Use of Telephone Marking Tape

Specification for Track Datum Markers on all Overhead Electrified Lines

Standards for the Maintenance of Mark IIIB Overhead Line Equipment

Examination of Rails at Locations Outside the Scope of Procedures U1 and U3

Specification for Radio Frequency Coaxial Feeder Cable with Zero-Halogen Low-Smoke Sheath for Railway Telecommunications

Requirements for Lockout Device to Protect Staff Working on Trains

Train to Signalbox Radio System (Train Radio)

Code of Practice for the Preparation of Isolation Diagrams and Instructions for A.C Electrified Lines

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document defines the requirements for the DC conductor rail energy system and the interfaces to rolling stock operating over the DC electrified…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document defines the interface requirements to the DC conductor rail energy system for all rolling stock operating over the DC electrified…

Guidance on DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GLRT1212 Iss 1 DC Conductor Rail Energy Subsystem and…

Guidance on Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GMRT2113 Iss 1 Rolling Stock Subsystem and Interfaces to DC…

Guidance on 'Signals, Railway Track, Explosive' (also known as 'Detonators')

This guidance is intended to assist infrastructure managers and railway undertakings in understanding their responsibilities in relation to…

Defective On-Train Equipment

Guidance on Defective on-Train Equipment

Lineside Signal Spacing and Speed Signage

Guidance on Lineside Signal Spacing and Speed Signage

Rail Industry Standard for Track to Train RFID compatibility

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

DC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an DC electrified area to carry out their duties, with the exception…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000).

Signals, Handsignals, Indicators and Signs Handbook

You will need this handbook if you need to understand the meaning of signals, handsignals, indicators and signs.

DC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

White diamond

This document provides design details for DA02 sign - White diamond.

Signal post telephone

This document provides design details for DB01 sign - Signal post telephone.

Lineside telephone

This document provides design details for DB03 sign - Lineside telephone.

Telephone for routine use by railway staff

This document provides design details for DB06 sign - Telephone for routine use by railway staff.

Cab secure radio channel change marker

This document provides design details for DC02 sign - Cab secure radio channel change marker.

RETB channel change marker

This document provides design details for DC04 sign - RETB channel change marker.

Entering and leaving an IVRS zone marker

This document provides design details for DC06 sign - Entering and leaving an IVRS zone marker.

GSM-R signal box phone number sign

This document provides design details for DD02 sign - GSM-R signal box phone number.

Deviation for countdown markers

This document provides design details for DEV-AK102-01 sign - Deviation for station approach countdown markers Applicable to the South West Trains…

Limited clearance sign

This document provides design details for BA04 sign - Limited clearance sign.

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.