Standards Catalogue

Rule Book Briefing Leaflet

Passenger Train Dispatch and Platform Safety Measures

Interface between Station Platforms, Track, Trains and Buffer Stops

Recording of Rolling Stock Data

This document provides a standard on rolling stock shared data. Recording of some data is mandatory to register a vehicle; other data may be useful,…

CCS System Transitions

This standard sets out requirements for controlling the hazards that arise when a train changes from using one type of signalling system, or train…

Application of the PRM NTSN

This document contains guidance on the application of the PRM NTSN, particularly when undertaking work that would not necessarily constitute an…

Rail Vehicle Structures

This document sets out requirements and guidance for the design of rail vehicle structures. A related document (SD001 issue two) contains all the…

System Requirements for the Introduction and Operation of Multi-Mode Rolling Stock

This document sets out requirements and guidance to support the introduction and operation of multi-mode rolling stock onto the Great Britain (GB)…

Shunting

Rule Book Briefing Leaflet

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

Provision of Signage at Power Changeover Locations

This document sets out requirements and guidance for provision of signage at power changeover locations for multi-mode rolling stock.

Maintaining the Visibility of Signals and Operational Signs

This document sets out requirements and guidance to ensure that the visibility of signals and operational signs are not adversely affected during the…

Medical Fitness Assessment

This document sets out requirements and guidance for the management of medical fitness assessment for safety critical workers on the GB mainline…

Lineside Operational Signs

This document sets out requirements, rationale and guidance for the application of lineside operational signs published in the RSSB catalogue. It also…

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Reference Limits for Freight Wagon Defects

This document sets out the criteria for addressing defects in freight wagons arising during operation, and the restrictions on their use that apply.

Requirements for the operation of freight trains and the conveyance of dangerous goods by any train

This document sets out requirements and guidance relating to the safe operation of freight trains and the safe movement of dangerous goods.

Train Operations Staff Manual

Track Workers Manual

Preparation and movement of trains

General duties and track safety for track workers

Master Module Manual

Possession Arrangements Form

This form is used by the PICOP to record the arrangements for a possession of a running line.

Work-site Certificate

This form is used by the Engineering Supervisor to record arrangements for setting up work sites within a possession of a running line.

Managing incidents, floods and snow

Pink Pages Briefing Leaflet

Working Manual for Rail Staff Handling and Carriage of Dangerous Goods - Appendix 1 - List of Dangerous Goods with their United Nations Number, Dangerous Goods Class and TOPS Commodity Code

High visibility clothing obligatory

This document provides design details for BA01 sign - High visibility clothing obligatory.

Temporary speed restriction repeater warning board

Supplementary sign at crossings where trains pass in excess of 100 mph

Warning sign for a non-vehicular crossing (PCR diagram 101)

Private level crossings: operating instructions for barrier (PCR diagram 104)

Signs for use with miniature red / green lights with and without a telephone (PCR diagrams 107 and 108)

Instructions for Use at a Crossing with Miniature Stop Lights and User-Operated Barriers (PCR diagram 110)

Reminder at a crossing with user-operated barriers (PCR diagram 112)

Instructions to non-vehicular traffic at a crossing with miniature stop lights (PCR diagram 114)

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This covers the use of plant…