Standards Catalogue

Engineers Handbook: Code of Practice for Signal Sighting

Materials Suitable for the Environment

Preparation of Control Table Testing Copies

Testing Point Detection Circuits

Solid State Interlocking Project: Technician's Terminal Tape Analysis Users' Guide

Use of Correct Equipment

Setting Up Time Relays

Aspect Sequences

Requirements for Simplified Bi-directional Signalling

Signals which Apply from Sidings on to Running Lines

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

Engineering Requirements for Steam Locomotives and other Heritage Rail Vehicles

This document sets out the engineering requirements for heritage rail vehicles (including steam locomotives) to support use when operating in heritage…

Operational Requirements for GSM-R Radio

This document contains the necessary requirements and guidance for the development of contingency plans to manage failures of the GSM-R voice system.…

Track to Train RFID Compatibility

This document sets out requirements for RFID compatibility between train and track, including management of application codes.  

On-Track Plant, Trolleys and Associated Equipment

Examination and repair of structural corrosion in Mark 1 type rolling stock

This technical note will help those maintaining or repairing Mark 1 type rolling stock to detect and remedy corrosion on this type of vehicle. This…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

DC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an DC electrified area to carry out their duties, with the exception…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000).

Signals, Handsignals, Indicators and Signs Handbook

You will need this handbook if you need to understand the meaning of signals, handsignals, indicators and signs.

DC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Haulage Capabilities of On Track Machines

Code of Practice for Management of Siding Safety Surveys

This Code of Practiceprovides guidance to enable the effective setting up of a safe system of work within all sidings allocated for stabling and…

Code of Practice for Route Knowledge within Possessions

This Code of Practice contains guidance and generic good practice for the management of route knowledge for train drivers within a possession. It sets…

Seasonal Operating of OTP

This poster is provided by the M&EE Networking Group to remind operators when adhesion is low, keep it slow.

OTP Mechanical Movement Limiting Device

This poster is provided by the M&EE Networking Group to remind the industry about the use of mechanical movement limiting device and the restrictions…

Rail Handling – Rail Turner Awareness

This poster is provided by the M&EE Networking Group to remind industry about the competence requirements necessary for the Crane Controller and…

Code of Practice for Brake Testing of OTP

This Code of Practice details the testing of the braking system of OTP excluding Trolleys during operations and routine maintenance examination…

Reporting track defects

This poster is provided by the M&EE Networking Group to remind industry that any track defects which could affect plant and equipment safely…