Standards Catalogue

Recording of Rolling Stock Data

This document provides a standard on rolling stock shared data. Recording of some data is mandatory to register a vehicle; other data may be useful,…

CCS System Transitions

This standard sets out requirements for controlling the hazards that arise when a train changes from using one type of signalling system, or train…

Application of the PRM NTSN

This document contains guidance on the application of the PRM NTSN, particularly when undertaking work that would not necessarily constitute an…

Rail Vehicle Structures

This document sets out requirements and guidance for the design of rail vehicle structures. A related document (SD001 issue two) contains all the…

System Requirements for the Introduction and Operation of Multi-Mode Rolling Stock

This document sets out requirements and guidance to support the introduction and operation of multi-mode rolling stock onto the Great Britain (GB)…

Shunting

Rule Book Briefing Leaflet

Changes to National Operations Publications for June 2021

Train Driver Manual

Signaller and Signalling Technician Manual

Traction batteries in rolling stock depots

The technical note aims to inform the industry on handling, storage and the safe maintenance practices of lithium-ion traction battery packs within…

Fire compartmentation and Li-ion traction batteries

The technical note aims to inform the industry on adequate design considerations for crashworthiness and fire barrier considerations to minimise the…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Pink Pages Briefing Leaflet

Working Manual for Rail Staff Handling and Carriage of Dangerous Goods - Appendix 1 - List of Dangerous Goods with their United Nations Number, Dangerous Goods Class and TOPS Commodity Code

Changes to National Operations Publications for December 2018

Line Blockage Form

This form is used by the Signaller, IWA, COSS, PC and SWL to record the details of a line blockage

ERTMS level 2 train signalling regulations

Regulations for train signalling by the European rail traffic management system (ERTMS). You will need this module if you carry out the duties of a…

Emergency Special Working Ticket

This form is to be used by the driver and signaller during emergency special working.

Train stopped by train failure

Rule Book Hand Book Issue History

Station duties and train dispatch

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

Supplementary sign for level crossings

Instructions for use at a vehicular crossing with a telephone (PCR diagram 103)

Sign indicating the penalty for failure to shut a gate at a vehicular crossing (PCR diagram 105)

Reminder at a crossing with user-operated gates (PCR diagram 111)

Sign at a vehicular crossing where there are overhead electric wires and the road approaches are on a gradient (PCR diagram 113)

No refuges sign

Instructions for use at a vehicular crossing without a telephone (PCR diagram 102)

Instructions for use at a crossing with miniature red / green lights and user-operated gates (PCR diagram 109)

Instructions at a crossing with gates (PCR diagram 115)

Horse riders to dismount at crossings where there are overhead electric lines

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.