Standards Catalogue

Nomenclature of Running Signals

Signal Post Identification Signs

Location of Signal Post Telephones

Wheel Scotches

Specification for Colours of Light Signals, Colour Filters and Lenses

Identification of Colour Light Signals

Barrow Crossings - Warning Arrangements

Location of Catch Points in M.A.S. Territory

Location of Catch Points in MAS Territory

Painting Schedule: Signal Boxes and Signal Department Equipment

Guidance on the Safety in Railway Tunnels Technical Specification for Interoperability

This document gives guidance on interpreting the requirements of the Safety in Railway Tunnels Technical Specification for Interoperability (SRT TSI).…

Signalling Lockout Systems to Protect Railway Undertaking Personnel

This document sets out requirements and guidance for signalling lockout systems provided or railway undertaking personnel to use.

Provision of Information and Signs for Access on the Railway

This document sets out requirements for the provision of information about access to and alongside the railway. It specifies where operational safety…

Guidance for the Development and Design Considerations of Passenger Rolling Stock Depots

This document provides guidance to industry to inform the development and design of passenger rolling stock depots. From the point at which a depot is…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements: Retrofit

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements: New Trains

Accident and Incident Investigation

Defective On-Train Equipment

Rail Traffic Loading Requirements for the Design of Railway Structures

Engineering Design of On-track Machines in Running Mode

AWS and TPWS Handbook

You will need this document if you carry out the duties of a driver or signaller. Information on changes to this issue can be found in the Rule Book…

Proceed-on-Sight Authority (PoSA)

You will need this module if your duties require you to identify and understand the meaning of PoSA signals. This document has be updated as part of…

Trains or shunting movements detained on running lines

You will need this module if you carry out the duties of a driver, shunter or signaller.

IWA or COSS setting up safe systems of work within possessions on ERTMS lines where lineside signals are not provided

You will need this handbook if you are an IWA or COSS setting up safe systems of work within ERTMS possessions. This document has been updated as part…

Instructions for track workers who use emergency protection equipment

This handbook is for those personnel who need to go on the operational railway to carry out their duties, and have been trained to carry out emergency…

Duties of the person in charge of the possession (PICOP) on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the person in charge of the possession (PICOP) on ERTMS lines. This document has been…

Engineering Supervisor's Certificate

Engineering supervisor's certificate for use on ERTMS level 2 without lineside signals routes.

Duties of a level crossing attendant

You will need this handbook if you carry out the duties of a level crossing attendant. This document has be updated as part of the December 2015 Rule…

Possession arrangements form (T3 ERTMS)

Possession arrangements form (T3 ERTMS) for use on ERTMS level 2 without lineside signals routes.

Pink Pages Briefing Leaflet

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.