Standards Catalogue

Control of Colour Light Signals in Relation to Possible 'Reading Through'

Emergency Detonator Placers in Colour Light Signalling Areas

Control of AWS Indicators for Permissive Working

Braking Distances

Braking Distances

Specification for Rail Pads Cut from Commercial Vehicle Tyres

Specification for Miniature Tractive Armature DC Single Wound Lamp Proving Relay, Plug-in Type for Railway Signalling Purposes

Specification for Miniature Tractive Armature AC Lamp Proving Relay, Plug-in Type, for use with Relay Signalling Position Light Junction Indicators

Specification for Miniature Tractive Armature AC Lamp Proving Relay Plug-in Type for Railway Signalling Purposes

Specification for Miniature D.C. Non-Safety Time Delay Relay Unit; Plug-in Type, for use in Point Control Circuits

Guidance on Vehicle Interconnector and Coupling Compatibility

Guidance on Mechanical Coupling of Rail Vehicles

Guidance on Lifting, Jacking, Recovery and Emergency Movement of Rail Vehicles

Guidance on Rail Vehicle Bodyshell, Bogie and Suspension Elements

Guidance on Rail Vehicle Interior Structures and Secondary Structural Elements

Traincrew Access to and Egress from Railway Vehicles

Rail Industry Standard for Network and Depot Interface Management - Isolation Documentation

This document sets out principles to be applied in the production and management of isolation documentation and local isolation instructions in…

On-board Energy Metering for Billing Purposes

This document sets out the energy metering requirements when electric traction units are fitted with an energy measuring system that provides data to…

Guidance on the Braking Requirements for Hauling Unbraked Multiple Units in Freight Trains

Rail Industry Standard for Onboard ETCS

General duties of an individual working alone (IWA)

This handbook is for those personnel with general duties of an individual working alone (IWA).

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

Duties of the machine controller (MC) and on-track plant operator

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator.

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Personnel asking for trains to be stopped form

This form is used by signallers to record the details when personnel ask for a line to be blocked for their own protection when going on or near the…

Level crossings - signallers' regulations

You will need this module if you carry out the duties of a signaller in an area where there is a level crossing.

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller, train preparer or competent person.

General duties and track safety for track workers

This handbook is for those personnel who need to go on the operational railway to carry out their duties, with the exception of a train driver, guard,…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.