Standards Catalogue

jUNCTION sIGNALLING

Outer and Inner Home Signals

Vehicle-on-Line Switches

Route Indicators on Running Signals

Subsidiary Signals

Ground Shunting Signals

Type of Colour Light Signal

Route Indicators (all types)

Replacement Switches for Automatic Signals

Track Circuit Clearance Points

Railway Wheelsets

Vehicle Registration, Marking and Numbering

Supplier Assurance

Arrangements Concerning the Non-Operation of Track Circuits During the Leaf Fall Contamination Period

This document details the requirements for identifying the need for, introduction and subsequent removal of, restrictions to normal operations to…

ERTMS/ETCS National Values

This Rail Industry Strandard (RIS) contains requirements and guidance for a process to determine or revise a set of values of ERTMS/ETCS National…

Ground Frames and Shunters' Releases

This document sets out the interface requirements for ground frames and shunters' releases that may be operated by railway undertaking personnel.

Guidance on the Operation and Traffic Management Technical Specification for Interoperability

This document provides guidance on interpretation of points within the Operation and Traffic Management TSI (OPE TSI) where, owing to incomplete or…

Engineering Requirements for Dispatch of Trains from Platforms

This document sets out the minimum engineering requirements for the facilities used in dispatching trains from platforms.

Tilting Trains: Controlling Tilt Systems to Maintain Clearances

This document sets out the means by which Tilting Trains are permitted to utilise the tilt mechanism over routes, parts of which contain sections…

Controlling the Speed of Tilting Trains through Curves

This document sets out the means by which tilting trains may be operated at higher speeds than non-tilting trains around curves.

Signalman's Point Setting Form (Rule Book Section F (part i)

Points Setting Agent's Form (Rule Book Section B Part 4)

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…