Standards Catalogue

Outer and Inner Home Signals

Vehicle-on-Line Switches

Route Indicators on Running Signals

Subsidiary Signals

Ground Shunting Signals

Type of Colour Light Signal

Route Indicators (all types)

Replacement Switches for Automatic Signals

Track Circuit Clearance Points

ATC (AWS) Brake Valve

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

Provision of Signage at Power Changeover Locations

This document sets out requirements and guidance for provision of signage at power changeover locations for multi-mode rolling stock.

Maintaining the Visibility of Signals and Operational Signs

This document sets out requirements and guidance to ensure that the visibility of signals and operational signs are not adversely affected during the…

Medical Fitness Assessment

This document sets out requirements and guidance for the management of medical fitness assessment for safety critical workers on the GB mainline…

Reference Limits for Freight Wagon Defects

This document sets out the criteria for addressing defects in freight wagons arising during operation, and the restrictions on their use that apply.

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Engineering Design of On-Track Machines in Travelling and Working Modes

This document sets out requirements and guidance for the application of the BS EN 14033:2017 series for on-track Machines (OTMs) in their travelling…

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

ERTMS Handbook

You will need this handbook if you need to understand how the European Rail Traffic Management System (ERTMS) operates on the GB network.

Signaller's Form for Working Single and Bi-Directional ERTMS Lines by Pilot

Signaller's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Written Order 04 Permission to Make a Wrong-Direction Movement Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Pilot's form for working of single and bi-directional ERTMS lines by pilot

Pilot's form for working of single and bi-directional ERTMS lines by pilot.

Driver’s Ticket for Working Single and Bi-Directional Lines by Pilot

This form is issued by the pilot to drivers and records the details for the working of trains over a single or bi-directional line by pilot, during a…

Signaller's Single Line Working Form

This form is used by the signaller to record the arrangements for implementing single line working.

Written Order 05 Permission To Proceed Under Modified Working Arrangements on Single and Bi-Directional Lines Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Duties of a designated person (DP) and people working on rail vehicles

You will need this module if you carry out the duties of a designated person or person working on a rail vehicle.

Pilot's form for working of single and bi-directional lines by pilot

This form is used by the pilot to record the details for the working of trains over single or bi-directional lines by pilot, during a failure or when…

Permanently installed AWS cancelling indicator

This document provides design details for AA05 sign - Permanently installed AWS cancelling indicator

Warning of the start of cab-signalling

This document provides design details for AB01 sign - Warning of the start of cab-signalling.

Indication of start of cab-signalling

This document provides design details for AB02 sign - Indication of start of cab-signalling.

Indication of end of cab-signalling

This document provides design details for AB03 sign - Indication of end of cab-signalling.

TVM block marker

This document provides design details for AB04 sign - TVM block marker.

Cab signalling shunt entry board

This document provides design details for AB05 sign - Cab signalling shunt entry board.

Radio electronic token block: loop clear marker

This document provides design details for AB06 sign - Radio electronic token block: loop clear marker.

Start / end of cab signalling directional arrows

This document provides design details for AB07 sign - Start / end of cab signalling directional arrows.

ETCS block marker passable plate

This document provides design details for AB09 sign - ETCS block marker passable plate.

Controlled signal identification plate

This document provides design details for AC01 sign - Controlled signal identification plate.

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…