Standards Catalogue

Type of Colour Light Lignal

Specification for Civil Engineering Standard Design Spring Steel Clips for Flat Bottom Track

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

DC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an DC electrified area to carry out their duties, with the exception…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000).

Signals, Handsignals, Indicators and Signs Handbook

You will need this handbook if you need to understand the meaning of signals, handsignals, indicators and signs.

DC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Supplementary sign for level crossings

Instructions for use at a vehicular crossing with a telephone (PCR diagram 103)

Sign indicating the penalty for failure to shut a gate at a vehicular crossing (PCR diagram 105)

Reminder at a crossing with user-operated gates (PCR diagram 111)

Sign at a vehicular crossing where there are overhead electric wires and the road approaches are on a gradient (PCR diagram 113)

No refuges sign

Instructions for use at a vehicular crossing without a telephone (PCR diagram 102)

Instructions for use at a crossing with miniature red / green lights and user-operated gates (PCR diagram 109)

Instructions at a crossing with gates (PCR diagram 115)

Horse riders to dismount at crossings where there are overhead electric lines

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for Piling using OTP

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).