Standards Catalogue

Rail Vehicle Structures and Passive Safety

Track to Train RFID Compatibility

Provisional SPAD Data Collection Form (Infrastructure Manager)

Infrastructure managers and railway undertakings shall use the GORT3119 designated Provisional SPAD Data Collection forms when investigating signals…

Provisional ERTMS SPAD Data Collection Form (Infrastructure Manager)

Infrastructure managers and railway undertakings shall use the GORT3119 designated Provisional SPAD Data Collection forms when investigating signals…

Provisional ERTMS SPAD Data Collection Form (Railway Undertaking)

Provisional SPAD Data Collection Form (Railway Undertaking)

Incident Response Planning & Management

This document contains requirements and guidance for the development of rail incident response plans and the management of rail incidents.

Confidential Reporting System for Rail Staff

This document is a standard on the basic requirements of a confidential reporting system for rail staff

Guidance on Rolling Stock Subsystem and Interfaces to AC Energy Subsystem

AC Energy Subsystem and Interfaces to Rolling Stock Subsystem

Traction batteries in rolling stock depots

The technical note aims to inform the industry on handling, storage and the safe maintenance practices of lithium-ion traction battery packs within…

Fire compartmentation and Li-ion traction batteries

The technical note aims to inform the industry on adequate design considerations for crashworthiness and fire barrier considerations to minimise the…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Station duties and train dispatch

You will need this module if you carry out the duties of a driver, a guard, a person in charge (PIC) of dispatch or staff responsible for train…

Observing and obeying signalling indications. Train warning systems. Reporting signalling failures and irregularities

You will need this module if you carry out the duties of a driver, person controlling train movements, shunter or signaller.

Dealing with a train accident or train evacuation

You will need this module if you carry out the duties of a driver, guard or signaller.

Duties of the COSS and person in charge when using a hand trolley

You will need this handbook if you are the COSS or SWL and person in charge when using a hand trolley.

Glossary of Railway Terminology

You will need this glossary if you are issued with GERT8000.

Work on signalling equipment – duties of the signalling technician

You will need this handbook if you carry out the duties of a signalling technician.

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Signal Passed at Danger (SPAD) or Train Trip or Unauthorised Movement

For use by signallers in cases of a SPAD being investigated.

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Code of Practice for OTP Recovery

This Code of Practice details the processes required for the recovery of failed On Track Plant from the infrastructure.

Code of Practice for Plant Modules on Rail Wagons and Trailers

Code of Practice for Haulage Capabilities of On Track Machines

Code of Practice for Working Safety Practices for Maintenance and Repair of OTMs

This Code of Practice contains guidance on the safety conditions and behaviours to enable safe maintenance of on-track machines (OTMs).

Code of Practice for Management of OTM Speeds within T3 Engineering Possessions

This Code of Practice contains guidance and generic good practice for the management of OTM speeds within T3 engineering possessions. It sets out the…

Code of Practice for OTM Driver Communication Review Group (CRG)

Code of Practice for the Storage and Recommissioning of OTP

Code of Practice for Management of Sidings Safety Surveys

Code of Practice for Route Knowledge within Possessions

Autumn Poster 2021

This poster details the actions to be taken when rail adhesion is worse than would be expected. Also what to do when asked to make a controlled test…