Standards Catalogue

Changes to National Operations Publications for December 2019

Permissible Track Forces and Resistance to Derailment and Roll-Over of Railway Vehicles

Railway Wheelsets

Size of Vehicles and Position of Equipment

High Visibility Clothing

This document sets out the minimum requirements for high-visibility clothing.

Spoken Safety Critical Communications

This document sets out requirements for spoken safety critical communications, including monitoring.

Approval of Changes to Axle Bearing Lubricants

This document gives guidance on applying the requirements of RIS-2700-RST when making changes to axle bearing greases that have been approved and…

Confidential Reporting System for Rail Staff

Rail Vehicle Lettered Differential Speeds Classification

Rule Book Hand Book Issue History

Permissible Track Forces and Resistance to Derailment and Roll-Over of Railway Vehicles

Guidance Note on Vehicle Static Testing

GB Requirements for Platform Height, Platform Offset and Platform Width

Interface between Station Platforms, Track, Trains and Buffer Stops

Electromagnetic Compatibility of Train Detection Infrastructure with Rail Vehicles

RIS-0725-CCS Iss 1.1 is a rail industry standard correction release on immunity levels of infrastructure-based train detection systems, to provide…

Rail Industry Standard on Control of Mobile communication Equipment use in Driving Cabs

This document contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains.

Hauling Unbraked Fixed Formations in Freight Trains

This document gives guidance on the braking requirements for hauling unbraked multiple units and other fixed formations in a freight train. This…

Engineering Certification of Railborne Plant and the Assessment of Non-Railborne Plant

This document is the industry agreed standard for the certification of railborne plant and the assessment of non-railborne plant. It provides an…

Rail Industry Standard for Accident and Incident Investigation

Internet Access on Trains for Customer and Operational Railway Purposes

This document is intended to assist in the procurement of system and services to enable Internet access on trains, and suppliers in pre-empting the…

Section V - Broken rails and bridge strikes

Section A - General responsibilities, safety and security

Section B(iii) - Your general duties when you are on or near the line

Section H(ii) - Working of trains - Out of course working and defective vehicles

Section K - Trains or vehicles detained on running lines and loops

Section P(i) - Working of single lines

Section T(iii) - Protection of engineering work when the engineer takes possession of the line

Section B(i) - Your safety when you are walking on or near the line

Section E - Failure, repair, renewal and maintenance of signalling equipment

Section R - Loading or unloading rail vehicles during engineering work

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.