Standards Catalogue

Identification of roller bearing defects

This document sets out requirements and guidance for the identification and recording of roller bearing defects at overhaul, for taper, cylindrical…

Level Crossing Systems

This document sets out requirements for level crossing systems and guidance on the application of controls to mitigate the risk of collision of a…

Wheelsets handling and storage

This document sets out requirements and guidance for the handling and storage of wheelsets and their components.

Time and Date in Railway Systems

This document sets out requirements and guidance for the use, interpretation and formatting of time and date information in railway systems.

Psychometric Assessment in Train Driver Selection

This document sets out requirements and guidance on the psychometric assessment used during the selection process for train driver candidates who will…

Changes to National Operations Publications for December 2024

Lineside Operational Signs

List of Dangerous Goods and their United Nations Numbers

You will need this handbook if you need to understand what dangerous goods are, how they are classified and the meaning of their warning signs.

IWA or COSS setting up safe systems of work within possessions

You will need this handbook if you carry out the duties of an IWA or COSS setting up safe systems of work within possessions.

General signalling regulations

You will need this module if you carry out the duties of a signaller.

Guidance on the Energy TSI

This document gives guidance on interpreting the requirements of the Energy Technical Specification for Interoperability 2014 (ENE TSI) Commission…

GSM-R Train Voice Radio Systems

This document sets out the requirements for the application of GSM-R train voice radio systems, specifically interface requirements for the…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document provides GB requirements for exterior doors and Selective Door Operation (SDO) systems.

The Management of Packet 44 Applications

Guidance on High-Integrity Software-Based Systems for Railway Applications

In-Service Examination and Reference Limits for Freight Wagons

Weekly Operating Notice, Periodical Operating Notice and the Sectional Appendix

This document sets out the arrangements for the production of information relating to engineering work, alterations to track and signalling…

Guidance on the Application of the Control Command and Signalling TSI

This guidance note has been produced to provide application guidance on the CCS TSI. The CCS TSI was adopted by Commission Regulation (EU) 2016/919/EC…

Positioning of Lineside Telephones

This document sets out the requirements for assessing the positioning of lineside operational telephones and the provision of information labels.

Information for Safe Train Operation

This document sets out requirements for information to be provided by the railway undertaking to the infrastructure manager regarding train running on…

Duties of the engineering supervisor (ES)

Duties of the person in charge of the possession (PICOP)

Possession of a running line for engineering work

Duties of the person in charge of the siding possession (PICOS)

Signaller's Line Blockage Form

IWA / COSS / PC Line Blockage Form

Changes to National Operations Publications for December 2010

GSM-R (IVRS) Radio system Handbook

Duties of a designated person (DP) and people working on rail vehicles

AM Amendments module

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.