Standards Catalogue

Guidance Note on Vehicle Static Testing

GB Requirements for Platform Height, Platform Offset and Platform Width

Interface between Station Platforms, Track, Trains and Buffer Stops

Electromagnetic Compatibility of Train Detection Infrastructure with Rail Vehicles

RIS-0725-CCS Iss 1.1 is a rail industry standard correction release on immunity levels of infrastructure-based train detection systems, to provide…

Rail Industry Standard on Control of Mobile communication Equipment use in Driving Cabs

This document contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains.

Hauling Unbraked Fixed Formations in Freight Trains

This document gives guidance on the braking requirements for hauling unbraked multiple units and other fixed formations in a freight train. This…

Engineering Certification of Railborne Plant and the Assessment of Non-Railborne Plant

This document is the industry agreed standard for the certification of railborne plant and the assessment of non-railborne plant. It provides an…

Rail Industry Standard for Accident and Incident Investigation

Changes to National Operations Publications for March 2019

Internet Access on Trains for Customer and Operational Railway Purposes

This document is intended to assist in the procurement of system and services to enable Internet access on trains, and suppliers in pre-empting the…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Pilot's Single Line Working Form

You will need this form if you carry out the duties of a pilot.

Single Line Working

You will need this module if you carry out the duties of a driver, pilot or signaller.

Working single and bi-directional lines by pilot

You will need this module if you carry out the duties of a driver, pilot or signaller.

Pilot's form for working of single and bi-directional lines by pilot

This form is used by the pilot to record the details for the working of trains over single or bi-directional lines by pilot, during a failure or when…

Signaller's Form for Working Single and Bi-Directional Lines by Pilot

This form is used by signallers to record the details for the working of trains over a single or bi-directional line by pilot, during a failure or…

Duties of the engineering supervisor (ES) or safe work leader (SWL) in a possession on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the ES or SWL on ERTMS lines.

Rule Book Handbook Issue History

Driver’s Single Line Working Ticket

Station duties and train dispatch

Preparation and movement of trains: Defective or isolated vehicles and on-train equipment

Electrical hazard

This document provides design details for BD01 sign - Electrical hazard.

Entering and leaving a GSM-R radio zone marker

This document provides design details for DC01 sign - Entering and leaving a GSM-R radio zone marker.

Combined End of GSM-R and National Radio Network Channel Change Marker

This document provides design details for DC05 sign - Combined end of GSM-R and national radio network channel change marker.

GSM-R signal box phone number short code

This document provides design details for DD03 sign - GSM-R signal box phone number short code.

Signal post telephone - limited clearance label

This document provides design details for DB02 sign - Signal post telephone - limited clearance label.

Temporary speed restriction AWS cancelling indicator

This document provides design details for AF08 sign - Temporary speed restriction AWS cancelling indicator.

Level crossing warning sign

This document provides design details for AH01 sign - Level crossing warning sign.

Level crossing sighting board

This document provides design details for AH05 sign - Level crossing sighting board.

Countdown markers

This document provides design details for AK102 sign - Countdown markers.

Mile Posts

This document provides design details for AK201m sign - Mile posts.

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.