Standards Catalogue

Guidance Note on Vehicle Static Testing

GB Requirements for Platform Height, Platform Offset and Platform Width

Interface between Station Platforms, Track, Trains and Buffer Stops

Electromagnetic Compatibility of Train Detection Infrastructure with Rail Vehicles

RIS-0725-CCS Iss 1.1 is a rail industry standard correction release on immunity levels of infrastructure-based train detection systems, to provide…

Rail Industry Standard on Control of Mobile communication Equipment use in Driving Cabs

This document contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains.

Hauling Unbraked Fixed Formations in Freight Trains

This document gives guidance on the braking requirements for hauling unbraked multiple units and other fixed formations in a freight train. This…

Engineering Certification of Railborne Plant and the Assessment of Non-Railborne Plant

This document is the industry agreed standard for the certification of railborne plant and the assessment of non-railborne plant. It provides an…

Rail Industry Standard for Accident and Incident Investigation

Changes to National Operations Publications for March 2019

Internet Access on Trains for Customer and Operational Railway Purposes

This document is intended to assist in the procurement of system and services to enable Internet access on trains, and suppliers in pre-empting the…

Functioning and Control of Exterior Doors on Passenger Vehicles

This document provides GB requirements for exterior doors and Selective Door Operation (SDO) systems.

The Management of Packet 44 Applications

Guidance on High-Integrity Software-Based Systems for Railway Applications

In-Service Examination and Reference Limits for Freight Wagons

Weekly Operating Notice, Periodical Operating Notice and the Sectional Appendix

This document sets out the arrangements for the production of information relating to engineering work, alterations to track and signalling…

Guidance on the Application of the Control Command and Signalling TSI

This guidance note has been produced to provide application guidance on the CCS TSI. The CCS TSI was adopted by Commission Regulation (EU) 2016/919/EC…

Positioning of Lineside Telephones

This document sets out the requirements for assessing the positioning of lineside operational telephones and the provision of information labels.

Information for Safe Train Operation

This document sets out requirements for information to be provided by the railway undertaking to the infrastructure manager regarding train running on…

Provision of Information and Signs for Access on the Railway

Operational Security Response Planning

Possession Workers Manual

Train Operations Staff Manual

Track Workers Manual

Master manual

General signalling regulations

Rule Book Module Issue History

Rule Book Handbook Issue History

Signals, Handsignals, Indicators and Signs Handbook

Changes to National Operations Publications for June 2024

Driver’s Single Line Working Ticket

This form should be used by the driver when single line working applies.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.