Standards Catalogue

Guidance Note on Vehicle Static Testing

GB Requirements for Platform Height, Platform Offset and Platform Width

Interface between Station Platforms, Track, Trains and Buffer Stops

Electromagnetic Compatibility of Train Detection Infrastructure with Rail Vehicles

RIS-0725-CCS Iss 1.1 is a rail industry standard correction release on immunity levels of infrastructure-based train detection systems, to provide…

Rail Industry Standard on Control of Mobile communication Equipment use in Driving Cabs

This document contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains.

Hauling Unbraked Fixed Formations in Freight Trains

This document gives guidance on the braking requirements for hauling unbraked multiple units and other fixed formations in a freight train. This…

Engineering Certification of Railborne Plant and the Assessment of Non-Railborne Plant

This document is the industry agreed standard for the certification of railborne plant and the assessment of non-railborne plant. It provides an…

Rail Industry Standard for Accident and Incident Investigation

Changes to National Operations Publications for March 2019

Internet Access on Trains for Customer and Operational Railway Purposes

This document is intended to assist in the procurement of system and services to enable Internet access on trains, and suppliers in pre-empting the…

Guidance on the Safety in Railway Tunnels Technical Specification for Interoperability

This document gives guidance on interpreting the requirements of the Safety in Railway Tunnels Technical Specification for Interoperability (SRT TSI).…

Signalling Lockout Systems to Protect Railway Undertaking Personnel

This document sets out requirements and guidance for signalling lockout systems provided or railway undertaking personnel to use.

Provision of Information and Signs for Access on the Railway

This document sets out requirements for the provision of information about access to and alongside the railway. It specifies where operational safety…

Guidance for the Development and Design Considerations of Passenger Rolling Stock Depots

This document provides guidance to industry to inform the development and design of passenger rolling stock depots. From the point at which a depot is…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements: Retrofit

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements: New Trains

Accident and Incident Investigation

Defective On-Train Equipment

Rail Traffic Loading Requirements for the Design of Railway Structures

Engineering Design of On-track Machines in Running Mode

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

DC Electrified Lines

This handbook is for those personnel who need to go on the operational railway in an DC electrified area to carry out their duties, with the exception…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Rule Book Briefing Leaflet

Each issue of the Rule Book Briefing Leaflet contains a summary of the changes being introduced to GERT8000.

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000).

Signals, Handsignals, Indicators and Signs Handbook

You will need this handbook if you need to understand the meaning of signals, handsignals, indicators and signs.

DC Electrified Lines

You will need this module if you carry out the duties of a train driver, guard, shunter, designated person (DP), signaller, crossing keeper in DC…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Electrical hazard

This document provides design details for BD01 sign - Electrical hazard.

Entering and leaving a GSM-R radio zone marker

This document provides design details for DC01 sign - Entering and leaving a GSM-R radio zone marker.

Combined End of GSM-R and National Radio Network Channel Change Marker

This document provides design details for DC05 sign - Combined end of GSM-R and national radio network channel change marker.

GSM-R signal box phone number short code

This document provides design details for DD03 sign - GSM-R signal box phone number short code.

Signal post telephone - limited clearance label

This document provides design details for DB02 sign - Signal post telephone - limited clearance label.

Temporary speed restriction AWS cancelling indicator

This document provides design details for AF08 sign - Temporary speed restriction AWS cancelling indicator.

Level crossing warning sign

This document provides design details for AH01 sign - Level crossing warning sign.

Level crossing sighting board

This document provides design details for AH05 sign - Level crossing sighting board.

Countdown markers

This document provides design details for AK102 sign - Countdown markers.

Mile Posts

This document provides design details for AK201m sign - Mile posts.

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.