Standards Catalogue

Rail Traffic Loading Requirements for the Design of Railway Structures

Engineering Design of On-track Machines in Running Mode

Track circuit block regulations

Rail Industry Standard for the Design of On-track Machines in Working and Travelling Modes

Compatibility Requirements for Track Circuit Assisters (TCAs) on Rail Vehicles

This sets out Great Britain (GB) requirements on where TCAs shall be fitted onto a vehicle and how they shall be set up.

Functionality and Management of Track Circuit Assisters (TCAs) on Rail Vehicles

This document sets out requirements for the functionality, testing and management of failures of TCAs on rail vehicles.

Rail Industry Standard for Station Infrastructure

This document has been published to provide a voluntary standard on station infrastructure, for infrastructure managers responsible for managing and…

Recommendations for the Risk Assessment of Buffer Stops and End Impact Walls

This document gives details of a recommended method which, if followed, would meet the requirements of section 11, Buffer Stops and End Impact Walls,…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

Rule Book Module Issue History

Specification for Miniature Tractive Armature AC Lamp Proving Relay Plug-in Type for Railway Signalling Purposes

Specification for Miniature D.C. Non-Safety Time Delay Relay Unit; Plug-in Type, for use in Point Control Circuits

Specification for Miniature Twin Tractive Armature A.C. Immune D.C. Biased Neutral Line Relay Unit, Plug-in Type, for Railway Signalling Purposes

Track Circuit Clearance Points

Specification for Miniature Tractive Armature D.C Neutral Track Relay for use with Aster Type 'U' Plug-in Type for Railway Signalling Purposes

Factors of Safety of Wire Ropes, Electric Lifts and Hoists

Specification for Wire, Hard Drawn Copper, PVC Insulated, High Voltage

Specification for Miniature Twin Tractive Armature D.C. Slow-Acting Neutral Line Relay Unit, Plug-In Type, for Railway Signalling Purposes

Control of Shunting Signals

Specification for Miniature Tractive Armature DC Neutral Track Relay, Plug-in Type for Railway Signalling Purposes

Pilot's Single Line Working Form

You will need this form if you carry out the duties of a pilot.

Single Line Working

You will need this module if you carry out the duties of a driver, pilot or signaller.

Working single and bi-directional lines by pilot

You will need this module if you carry out the duties of a driver, pilot or signaller.

Pilot's form for working of single and bi-directional lines by pilot

This form is used by the pilot to record the details for the working of trains over single or bi-directional lines by pilot, during a failure or when…

Signaller's Form for Working Single and Bi-Directional Lines by Pilot

This form is used by signallers to record the details for the working of trains over a single or bi-directional line by pilot, during a failure or…

Duties of the engineering supervisor (ES) or safe work leader (SWL) in a possession on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the ES or SWL on ERTMS lines.

Rule Book Handbook Issue History

Driver’s Single Line Working Ticket

Station duties and train dispatch

Preparation and movement of trains: Defective or isolated vehicles and on-train equipment

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.