Standards Catalogue

Functionality and Management of Track Circuit Assisters (TCAs) on Rail Vehicles

This document sets out requirements for the functionality, testing and management of failures of TCAs on rail vehicles.

Rail Industry Standard for Station Infrastructure

This document has been published to provide a voluntary standard on station infrastructure, for infrastructure managers responsible for managing and…

Recommendations for the Risk Assessment of Buffer Stops and End Impact Walls

This document gives details of a recommended method which, if followed, would meet the requirements of section 11, Buffer Stops and End Impact Walls,…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

Rule Book Module Issue History

Changes to National Operations Publications for June 2018

GB Requirements for Platform Height, Platform Offset and Platform Width

Requirements for the Position of Infrastructure and for Defining and Maintaining Clearances

Requirements for the Size of Vehicles and Position of Equipment

Interface between Station Platforms, Track, Trains and Buffer Stops

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

Provision of Signage at Power Changeover Locations

This document sets out requirements and guidance for provision of signage at power changeover locations for multi-mode rolling stock.

Maintaining the Visibility of Signals and Operational Signs

This document sets out requirements and guidance to ensure that the visibility of signals and operational signs are not adversely affected during the…

Medical Fitness Assessment

This document sets out requirements and guidance for the management of medical fitness assessment for safety critical workers on the GB mainline…

Lineside Operational Signs

This document sets out requirements, rationale and guidance for the application of lineside operational signs published in the RSSB catalogue. It also…

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Reference Limits for Freight Wagon Defects

This document sets out the criteria for addressing defects in freight wagons arising during operation, and the restrictions on their use that apply.

Requirements for the operation of freight trains and the conveyance of dangerous goods by any train

This document sets out requirements and guidance relating to the safe operation of freight trains and the safe movement of dangerous goods.

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

Duties of the machine controller (MC) and on-track plant operator

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator.

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Personnel asking for trains to be stopped form

This form is used by signallers to record the details when personnel ask for a line to be blocked for their own protection when going on or near the…

Level crossings - signallers' regulations

You will need this module if you carry out the duties of a signaller in an area where there is a level crossing.

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller, train preparer or competent person.

General duties and track safety for track workers

This handbook is for those personnel who need to go on the operational railway to carry out their duties, with the exception of a train driver, guard,…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Possession of a running line for engineering work

You will need this module if you carry out the duties of a driver or signaller.

Distant signal sign and identification plate

This document provides design details for AC02 sign - Distant signal sign and identification plate.

Automatic signal sign and identification plate

This document provides design details for AC03 sign - Automatic signal sign and identification plate.

Semi-automatic signal sign and identification plate

This document provides design details for AC04 sign - Semi-automatic signal sign and identification plate.

Intermediate block home signal sign and identification plate

This document provides design details for AC05 sign - Intermediate block home signal sign and identification plate.

CSR alias plate

This document provides design details for AC06 sign - CSR alias plate.

SPAD indicator sign and identification plate

This document provides design details for AC07 sign - SPAD indicator sign and identification plate.

Points indicator sign

This document provides design details for AC08 sign - Points indicator sign.

Ground position light signal identification plate

This document provides design details for AC09 sign - Ground position light signal identification plate.

ETCS identification plate

This document provides design details for AC11 sign - ETCS identification plate.

GSM-R alias plate

This document provides design details for AC12 sign - GSM-R alias plate.

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…