Standards Catalogue

Possession Workers Manual

Rule Book Briefing Leaflet

Master Manual

Train Driver Manual

Train Operations Staff Manual

Guidance on wagon maintenance related to recommendations from RAIB reports

This technical note documents findings from all reports, bulletins, and safety digests, published by RAIB, where maintenance of rail wagons has been…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Speeds

You will need this module if you carry out the duties of a driver, signaller or train preparer.

Failure of, or work on, signalling equipment - signallers' regulations

You will need this module if you carry out the duties of a signaller.

Permissive Working Risk Assessment and Risk Controls

This document sets out the Control, Command and Signalling (CCS) system requirements for authorising a train movement into an occupied section of…

Driver Controlled Operation (DCO) On-Train Camera/Monitors (OTCM)

This standard sets out requirements for the functions, design and testing of Driver Controlled Operation (DCO) On-Train Camera/Monitor (OTCM) systems…

Requirements for Minimum Signalling Braking and Deceleration Distances

This document specifies the Minimum Signalling Braking Distance (MSBD) and Minimum Deceleration Distance (MDD) for lineside signal spacings and the…

Interface Requirements for Connected Driver Advisory System

This document sets out requirements for the data interfaces between the infrastructure manager (IM) and the railway undertakings (RUs) for an…

AWS and TPWS Application Requirements

Rail Industry Standard for Accident and Incident Investigation

Engineering Certification of Railborne Plant and the Assessment of Non-Railborne Plant

Signing of Permissible Speeds

Signing of Temporary and Emergency Speed Restrictions

Sanding Equipment

Track circuit block regulations

Written Order 03 Instruction to Run At Caution Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Written Order 01 Permission To Start In SR Or To Pass An EOA Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Written Order 02 Permission to Proceed After Train Trip Form

This form is dictated by the signaller to the driver of fitted trains, on ERTMS level 2 lines.

Written Order 05 Permission To Proceed Under Modified Working Arrangements on Single and Bi-Directional Lines Form

Written Order 04 Permission to Make a Wrong-Direction Movement Form

Trains or shunting movements detained, or vehicles left on ERTMS running lines

Speeds (ERTMS lines)

Passing an end of authority (EOA) without a movement authority (MA)

ERTMS cab signalling

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.